Prototype Steam Plant sebagai Penyedia Sumber Daya Listrik pada Sistem Vessel To Grid (V2G)

This research aims to develop and evaluate the performance of a steam plant prototype designed as an alternative source of electrical energy to support the Vessel to Grid (V2G) concept. Utilization of backup energy on ships is becoming important as electricity demand increases and demands for a more sustainable electrical system. This system relies on ESP32 microcontroller technology as a control center that functions to monitor and control several key parameters, including steam pressure, combustion temperature, boiler water level, and the generated electrical voltage. The research method used is an experiment with a static and dynamic testing approach. Static testing is carried out to measure the performance of main components such as the boiler, turbine, and generator separately, while dynamic testing focuses on evaluating the overall system by involving the integration of sensors and supporting actuators. The test data is then analyzed quantitatively to determine the system's response to variations in steam pressure, temperature, and other operational conditions. The results show that the steam produced by the boiler is able to rotate the turbine, thereby driving the generator to produce electricity. The maximum voltage achieved is 25.7 volts at a steam pressure of 50 psi. The highest energy conversion efficiency was recorded at 4%, while the lowest efficiency was 0.9%. These findings demonstrate that, despite its relatively low efficiency, the prototype can function as an alternative energy source and emergency backup solution. Thus, this research provides an initial contribution to supporting the implementation of the V2G concept through the development of a small-scale steam plant-based energy conversion system.