XPS as a probe of the chemical state of Cu during thermal decomposition of copper oxalate in hydrogen

• XPS study of the thermal decomposition of CuC 2 O 4 ·0.31H 2 O under H 2 environment. • In the range of 230–260 °C, the sample consists of defective oxalate (Cu 2+ ) and Cu 2 O (Cu 1+ ) and Cu 0 nuclei. • The physicochemical state of CuC 2 O 4 under thermal exposure differs from that under prolonged X-ray irradiation. • A variety of oxygenated carbon functionalities detected on Cu indicates the occurrence of catalytic reactions. X-ray photoelectron spectroscopy was employed to study the thermal decomposition of Cu oxalate hydrate, CuC 2 O 4 ·0.31H 2 O, under hydrogen environmental conditions. Analysis of the parameters of Cu 2p, Cu L 3 VV, C 1 s, O 1 s and valence band high-resolution XP spectra showed that the structure, composition and chemical state of copper atoms continuously change with increasing temperature. After dehydration of the sample, the nucleation and accumulation of Cu 2 O and Cu phases along with the deterioration of the residuary oxalate structure was revealed to occur in the temperature range of ∼230–260 °C. The simultaneous existence of all three chemical states, Cu 2+ , Cu 1+ and Cu 0 , in the decomposing material indicated two reaction pathways for the decomposition of oxalate to be in operation. In this range of temperatures, the amount of Cu 2 O increased slowly and non– monotonically, peaking at 250 °C, whereas the amount of Cu increased monotonically, remaining below that of Cu 2 O up to 250 °C, before snowballing due to the rapid disintegration of the oxalate structure to form metallic Cu at 280 °C. The surface of the final product was found to be covered with various adsorbed oxygen-containing carbon functional groups formed because of various reactions, including hydrogenation of the evolving CO 2 catalyzed by active Cu nanoparticles. A comparison of the changes in the Cu oxalate state under heating and prolonged X-ray irradiation was performed. The XPS studies were complemented by XRD, TG, and TPDec coupled with quadrupole mass spectrometry.

Authors

Institutions

Publication Details

Journal
Applied Surface Science
Published
2025-09-22
DOI
https://doi.org/10.1016/j.apsusc.2025.164671
Citations
3
Primary Topic
Copper-based nanomaterials and applications
Type
article
Field-Weighted Citation Impact
1.55
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

XPS as a probe of the chemical state of Cu during thermal decomposition of copper oxalate in hydrogen

S. P. Chenakin, Norbert Kruse
3 citations
Applied Surface Science
Copper-based nanomaterials and applications
1.55
article

XPS as a probe of the chemical state of Cu during thermal decomposition of copper oxalate in hydrogen

S. P. Chenakin, Norbert Kruse
article en
3 citations

Abstract

• XPS study of the thermal decomposition of CuC 2 O 4 ·0.31H 2 O under H 2 environment. • In the range of 230–260 °C, the sample consists of defective oxalate (Cu 2+ ) and Cu 2 O (Cu 1+ ) and Cu 0 nuclei. • The physicochemical state of CuC 2 O 4 under thermal exposure differs from that under prolonged X-ray irradiation. • A variety of oxygenated carbon functionalities detected on Cu indicates the occurrence of catalytic reactions. X-ray photoelectron spectroscopy was employed to study the thermal decomposition of Cu oxalate hydrate, CuC 2 O 4 ·0.31H 2 O, under hydrogen environmental conditions. Analysis of the parameters of Cu 2p, Cu L 3 VV, C 1 s, O 1 s and valence band high-resolution XP spectra showed that the structure, composition and chemical state of copper atoms continuously change with increasing temperature. After dehydration of the sample, the nucleation and accumulation of Cu 2 O and Cu phases along with the deterioration of the residuary oxalate structure was revealed to occur in the temperature range of ∼230–260 °C. The simultaneous existence of all three chemical states, Cu 2+ , Cu 1+ and Cu 0 , in the decomposing material indicated two reaction pathways for the decomposition of oxalate to be in operation. In this range of temperatures, the amount of Cu 2 O increased slowly and non– monotonically, peaking at 250 °C, whereas the amount of Cu increased monotonically, remaining below that of Cu 2 O up to 250 °C, before snowballing due to the rapid disintegration of the oxalate structure to form metallic Cu at 280 °C. The surface of the final product was found to be covered with various adsorbed oxygen-containing carbon functional groups formed because of various reactions, including hydrogenation of the evolving CO 2 catalyzed by active Cu nanoparticles. A comparison of the changes in the Cu oxalate state under heating and prolonged X-ray irradiation was performed. The XPS studies were complemented by XRD, TG, and TPDec coupled with quadrupole mass spectrometry.

Applied Surface ScienceVol. 716
Université Libre de Bruxelles (BE), G.V. Kurdyumov Institute for Metal Physics (UA), Washington State University (US)
Openalex Percentile: Top 16%
Copper-based nanomaterials and applications
1.55
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.