Study of Factors Influencing the Longitudinal Mechanical Performance of Shield Tunnels Traversing Soft–Hard Heterogeneous Soils

To investigate the longitudinal mechanical behavior of shield tunnels traversing soft and hard heterogeneous strata, a refined three-dimensional numerical model was developed using ABAQUS. The model includes tunnel segments, longitudinal bolts, reinforcement, longitudinal thrust, and additional loading conditions to simulate realistic mechanical responses during construction and operation. The results show that significant differential settlement occurs at the interface between soft and hard soils. Greater joint dislocation is observed on the soft soil side, while joint opening is more pronounced on the hard soil side. Compressive damage concentrates at the soil interface, whereas tensile damage is more severe in soft soil zones. The dislocation at the vault is distributed over a wider area but has a smaller magnitude than that at the arch bottom. Parametric analysis indicates that increasing longitudinal thrust enhances tunnel stiffness and reduces joint dislocation. However, it also leads to increased compressive and tensile damage due to greater trans-verse deformation. Optimizing bolt configuration, including diameter, inclination, and quantity, improves longitudinal stiffness and joint integrity, helping to reduce tensile damage and control deformation. These findings provide theoretical support for the structural design and performance optimization of shield tunnels in complex geological environments.