Fractal Analysis of the Microstructure and Functional Properties of Milk Powders

(1) Background: The impact of different drying methods on the functional properties and microstructure of milk powders was analyzed in this study. (2) Methods: Whole milk, skim milk, and buttermilk powders were obtained by freeze drying, spray drying, and roller drying. (3) Results: The examined powders differed in chemical composition, and these differences were attributed mainly to their fat content. The functional properties of the studied powders were determined mainly by the drying method and were less influenced by their composition. Loose and tapped bulk density was highest in roller-dried powders and lowest in freeze-dried powders. The flowability of milk powders was determined by calculating the Carr index and the Hausner ratio, and the results were used to classify the analyzed powders into the following groups: poorly flowing and cohesive (spray-dried samples), passable (roller-dried samples), and fair (freeze-dried samples). The volume of insoluble particles was highest in roller-dried powders and much lower in spray-dried powders, whereas freeze-dried powders were 99.8–99.9% soluble in water. Whole milk powder was characterized by low wettability (>180 s) regardless of the drying method. Powder morphology was influenced mainly by the drying method. (4) Conclusions: The fractal analysis demonstrated that spray-dried powders had the smallest fractal dimensions, which implies that their surface was least complex (most uniform). Regardless of the drying method, fractal dimensions were highest in whole milk powder, which could suggest that fat affects the microstructure of powders. The color parameters of milk powders were determined mainly by the drying method and were less influenced by the type of raw material used in powder production.