Experimental Study on Energy Characteristics of a Single Contaminated Bubble near the Wall in Shear Flow

This study experimentally investigates the dynamic behavior and energy conversion characteristics of a single contaminated bubble (deq = 2.49–3.54 mm, Reb = 470–830) rising near a vertical wall (S* = 1.41–2.02) in a linear shear flow (the conditions of average flow rate 0.1 m/s and shear rate 0.5 s−1) using a vertical water tunnel and varying sodium dodecyl sulfate (SDS) concentrations (0–50 ppm) and bubble sizes (via needle nozzles). High-speed imaging with orthogonal shadowgraphy captures bubble trajectories, rotation, deformation, and oscillation modes (2, 0) and (2, 2), revealing that an increasing SDS concentration suppresses deformation and the inclination amplitude while enhancing the oscillation frequency, particularly for smaller bubbles. Velocity analysis shows that vertical components remain steady, whereas wall-normal and spanwise fluctuations diminish with surfactant concentration, indicating stabilized trajectories. Additional mass force coefficients are larger for bigger bubbles and decrease with contamination level. Energy analysis demonstrates that surface energy dominates the total energy budget, with vertical kinetic energy comprising over 70% of the total kinetic energy under high SDS concentrations. The results highlight strong scale dependence and Marangoni effects in controlling near-wall bubble motion and energy transfer, providing insights for optimizing gas–liquid two-phase flow processes in chemical and environmental engineering applications.