Growth-Spiral Control of Defect Topology and Local Vertical Piezoresponse in Bi4Ti3O12 Thin Films
Aurivillius phase materials are layered ferroelectrics with high thermal stability (>600 °C) and fatigue resistance, yet their polarization is predominantly in-plane, limiting integration into vertical device architectures relevant to future memory, data storage, and neuromorphic computing concepts. Achieving robust vertical polarization in these systems remains fundamentally challenging because of crystallographic symmetry constraints. Although defects can locally reorient polarization, deterministic control of defect topology through growth-mode engineering remains largely unexplored in layered ferroelectrics. Here, we demonstrate that precise control of nominal precursor loading and oxygen partial pressure during direct liquid injection chemical vapor deposition enables a transition in epitaxial Bi4Ti3O12 thin films from two-dimensional growth to dislocation-mediated, chiral spiral growth. This work introduces growth spirals as a controllable route to engineer defect topology and grain morphology, rather than relying on post-growth or stochastic defect formation. Atomic-resolution microscopy and piezoresponse force microscopy reveal that chiral spiral-mediated morphologies exhibit a 135% higher local vertical piezoresponse amplitude and a reduced local vertical switching bias from ±20 to ±5 V compared with two-dimensional films. High-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) displacement mapping and density functional theory indicate that out-of-phase boundary defect-associated local structural distortions modify local symmetry, bonding, and strain in a manner consistent with an enhanced out-of-plane polarization component and local vertical electromechanical response. These results establish spiral-driven defect topology as a growth-controlled pathway for tuning the local vertical piezoresponse in layered ferroelectrics and suggest a broadly applicable design principle for future low-power vertical ferroelectric oxide devices.
Authors
- Joydipto Bhattacharya (ORCID: https://orcid.org/0000-0002-2103-2250)
- Sabir Hussain (ORCID: https://orcid.org/0000-0002-9259-5376)
- Valeria Nicolosi (ORCID: https://orcid.org/0000-0002-7637-4813)
- Tigran Simonian (ORCID: https://orcid.org/0000-0003-0259-6445)
- Lynette Keeney (ORCID: https://orcid.org/0000-0003-0980-514X)
- Michael Schmidt (ORCID: https://orcid.org/0000-0002-5601-460X)
- Debismita Dutta (ORCID: https://orcid.org/0009-0000-1100-2907)
Institutions
- Trinity College Dublin (IE)
- University College Cork (IE)
- Tyndall National Institute (IE)
Publication Details
- Journal
- ACS Applied Materials & Interfaces
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1021/acsami.6c14633
- Citations
- 2
- Primary Topic
- Ferroelectric and Piezoelectric Materials
- Type
- article
- Field-Weighted Citation Impact
- 1.69
Funders
- Science Foundation Ireland
- Trinity College Dublin
- Engineering and Physical Sciences Research Council
- Research Ireland