Interfacial Segregation of Fe and Si on TiB2 Surface and Refinement of Fe-Bearing Intermetallic Compounds and Primary Si

Abstract Al–Ti–B-based grain refiners have been successfully used in the aluminium industry for more than six decades. Recent advancements have demonstrated that manipulating the nucleation potency of substrates through interfacial segregation can enhance the heterogeneous nucleation of both single-phase and intermetallic compounds by providing structural and compositional templating. However, the segregation of Fe and Si, two of the most common alloying elements or impurities in Al alloys, on TiB 2 surface and its subsequent effects are not fully understood. In this work, TiB 2 particles were synthesized in an Al–3.7Ti–1.5B alloy melt containing 0.43 wt pct excess free Ti, followed by isothermal treatment to promote Fe and Si segregation on the TiB 2 surface. The segregation behaviour of Fe and Si on different terminated surfaces of the TiB 2 particles was investigated using scanning transmission electron microscopy (STEM). The experimental results show that Fe and Si exhibit distinct segregation behaviours depending on the atomic configuration of TiB 2 surfaces, leading to the formation of two-dimensional compounds (2DCs) at the Al/TiB 2 interfaces. The formation of interfacial segregation layers has been shown to profoundly affect subsequent solidification, particularly nucleation and growth processes of intermetallic compounds (IMCs) in the alloys, resulting in significant refinement of these phases and the final solidification microstructure. In part 1, this research focuses on investigating the nature of interfacial segregation of Fe and Si on TiB 2 particles. Experimental results concerning the segregation and the characterization of the structure and chemistry of the resulting interfacial layers are presented. In the subsequent Part II, the investigation will address the effects of Fe and Si interfacial segregation on the solidification behaviour of Al alloys, with particular emphasis on the heterogeneous nucleation and refinement of primary Fe-bearing intermetallic compounds and the primary Si phase in Al–Fe–Si and Al–Si alloys. Graphical Abstract

Authors

Institutions

Publication Details

Journal
Metallurgical and Materials Transactions A
Published
2025-09-12
DOI
https://doi.org/10.1007/s11661-025-07970-7
Citations
1
Primary Topic
Aluminum Alloy Microstructure Properties
Type
article
Field-Weighted Citation Impact
4.99
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Interfacial Segregation of Fe and Si on TiB2 Surface and Refinement of Fe-Bearing Intermetallic Compounds and Primary Si

Raluca Negrea, Z. Fan, Quentin M. Ramasse, Xiaorong Zhou et al.
1 citations
Metallurgical and Materials Transactions A
Aluminum Alloy Microstructure Properties
4.99
article

Interfacial Segregation of Fe and Si on TiB2 Surface and Refinement of Fe-Bearing Intermetallic Compounds and Primary Si

Raluca Negrea, Z. Fan, Quentin M. Ramasse, Xiaorong Zhou, Yun Wang, Zhongping Que
article en
1 citations

Abstract

Abstract Al–Ti–B-based grain refiners have been successfully used in the aluminium industry for more than six decades. Recent advancements have demonstrated that manipulating the nucleation potency of substrates through interfacial segregation can enhance the heterogeneous nucleation of both single-phase and intermetallic compounds by providing structural and compositional templating. However, the segregation of Fe and Si, two of the most common alloying elements or impurities in Al alloys, on TiB 2 surface and its subsequent effects are not fully understood. In this work, TiB 2 particles were synthesized in an Al–3.7Ti–1.5B alloy melt containing 0.43 wt pct excess free Ti, followed by isothermal treatment to promote Fe and Si segregation on the TiB 2 surface. The segregation behaviour of Fe and Si on different terminated surfaces of the TiB 2 particles was investigated using scanning transmission electron microscopy (STEM). The experimental results show that Fe and Si exhibit distinct segregation behaviours depending on the atomic configuration of TiB 2 surfaces, leading to the formation of two-dimensional compounds (2DCs) at the Al/TiB 2 interfaces. The formation of interfacial segregation layers has been shown to profoundly affect subsequent solidification, particularly nucleation and growth processes of intermetallic compounds (IMCs) in the alloys, resulting in significant refinement of these phases and the final solidification microstructure. In part 1, this research focuses on investigating the nature of interfacial segregation of Fe and Si on TiB 2 particles. Experimental results concerning the segregation and the characterization of the structure and chemistry of the resulting interfacial layers are presented. In the subsequent Part II, the investigation will address the effects of Fe and Si interfacial segregation on the solidification behaviour of Al alloys, with particular emphasis on the heterogeneous nucleation and refinement of primary Fe-bearing intermetallic compounds and the primary Si phase in Al–Fe–Si and Al–Si alloys. Graphical Abstract

Metallurgical and Materials Transactions AVol. 56(11)
University of Manchester (GB), Sci-Tech Daresbury (GB), Brunel University of London (GB)
Openalex Percentile: Top 5%
Aluminum Alloy Microstructure Properties
4.99
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.