Investigation of the stoichiometric hydrogen-air detonation evolution in T-shaped pipeline

This propagation behavior of irregular detonation waves in a T-shaped pipeline filled with stoichiometric hydrogen-air mixtures is investigated, and the effects of initial pressure (21-100 kPa) and inlet section length (0.3-0.8 m) on re-initiation in the bifurcated structure were explored. Experimental results reveal that detonation waves attenuate at the bifurcation. Based on the rhoCentralFoam solver, this study focuses on the evolution of detonation failure and re-initiation processes in a two-dimensional T-shaped pipe. The results show that the failure detonation wave after diffraction will re-initiate due to shock waves and localized explosion interactions, with the subsequent sustained development and stabilization of the detonation wave by the transverse wave. Under conditions of the low initial pressure and high inlet pipe aspect ratio, the re-initiation relies on the interaction of reflected shock waves and localized explosions; under the reverse conditions, the re-initiation can occur directly by the collisions of diffracted shock waves and reflective shock waves. As the pressure rises, the vertical locations of the reflected points decrease, and the shortening can be up to 56% compared to the same reflection. As the inlet length grows, stable detonation is delayed, yet re-initiation happens earlier. The length increase keeps the detonation recovery time nearly constant, expands the distance between the local explosion point and the reflected point, even to over five times, thus accumulating sufficient energy for re-initiation. These findings will enhance the understanding of hydrogen-air detonation propagation in bifurcated pipes and provide references for pipeline transportation safety schemes. • Investigating the characteristics of H2-Air detonation propagating in the T-pipe. • Re-initiation mode is related to inlet pipe length and initial pressure. • Extending inlet pipe can facilitate re-initiation and delay stable detonation. • Elevated initial pressure accelerates transverse wave generation and re-initiation. • Providing references for pipeline transportation safety schemes.

Authors

Institutions

Publication Details

Journal
Energy
Published
2025-09-16
DOI
https://doi.org/10.1016/j.energy.2025.138434
Citations
1
Primary Topic
Combustion and Detonation Processes
Type
article
Field-Weighted Citation Impact
4.99
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Investigation of the stoichiometric hydrogen-air detonation evolution in T-shaped pipeline

Xianshu Lv, Jianfei Ding, Jianliang Yu, Xingqing Yan et al.
1 citations
Energy
Combustion and Detonation Processes
4.99
article

Investigation of the stoichiometric hydrogen-air detonation evolution in T-shaped pipeline

Xianshu Lv, Jianfei Ding, Jianliang Yu, Xingqing Yan, Lianzhuo Zhang
article en
1 citations

Abstract

This propagation behavior of irregular detonation waves in a T-shaped pipeline filled with stoichiometric hydrogen-air mixtures is investigated, and the effects of initial pressure (21-100 kPa) and inlet section length (0.3-0.8 m) on re-initiation in the bifurcated structure were explored. Experimental results reveal that detonation waves attenuate at the bifurcation. Based on the rhoCentralFoam solver, this study focuses on the evolution of detonation failure and re-initiation processes in a two-dimensional T-shaped pipe. The results show that the failure detonation wave after diffraction will re-initiate due to shock waves and localized explosion interactions, with the subsequent sustained development and stabilization of the detonation wave by the transverse wave. Under conditions of the low initial pressure and high inlet pipe aspect ratio, the re-initiation relies on the interaction of reflected shock waves and localized explosions; under the reverse conditions, the re-initiation can occur directly by the collisions of diffracted shock waves and reflective shock waves. As the pressure rises, the vertical locations of the reflected points decrease, and the shortening can be up to 56% compared to the same reflection. As the inlet length grows, stable detonation is delayed, yet re-initiation happens earlier. The length increase keeps the detonation recovery time nearly constant, expands the distance between the local explosion point and the reflected point, even to over five times, thus accumulating sufficient energy for re-initiation. These findings will enhance the understanding of hydrogen-air detonation propagation in bifurcated pipes and provide references for pipeline transportation safety schemes. • Investigating the characteristics of H2-Air detonation propagating in the T-pipe. • Re-initiation mode is related to inlet pipe length and initial pressure. • Extending inlet pipe can facilitate re-initiation and delay stable detonation. • Elevated initial pressure accelerates transverse wave generation and re-initiation. • Providing references for pipeline transportation safety schemes.

EnergyVol. 336
Dalian University of Technology (CN), Dalian University (CN), Henan Polytechnic University (CN)
Openalex Percentile: Top 5%
Combustion and Detonation Processes
4.99
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.