3D Printable Hydrogel Based on TEMPO-Oxidized Cellulose Nanofibrils and Fmoc-FF for Enhanced Biological Performance and Cell Adhesion

Herein, we report a 3D printable ink made of a peptide-polysaccharide hybrid hydrogel composed of fluorenylmethyloxycarbonyl-diphenylalanine (Fmoc-FF) peptide and TEMPO-oxidized cellulose nanofibrils (ToCNF), synthesized using a pH-dependent sol–gel transition method. The ToCNF suspension is synthesized through the mechanical breakdown of a cellulose pulp using a microfluidizer, followed by its oxidation mediated with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO). The properties of the hybrid inks are compared in the presence (ToCNF/Fmoc-FF-Ca2+) and absence (ToCNF/Fmoc-FF) of the divalent cation Ca2+, which acts as the cross-linker, at two optimized weight ratios (r) of ToCNF and Fmoc-FF (r = 4.5 and 6.5). The rheological measurements show that the yield strength of the ToCNF/Fmoc-FF-Ca2+ gel is almost double that of the hydrogel composite without Ca2+ ions, especially at the concentration (C) of 10 mM CaCl2. This finding is further verified by 3D gel printing, which produced good quality prints with the cation cross-linked hydrogel. The structural analysis by Field Emission Scanning Electron Microscopy shows that the calcium ions can cross-link the ToCNF and also enhance the self-assembly of Fmoc-FF, which leads to the formation of rigid compact nanofibers even at physiological pH. The electrostatic interaction of the positively charged Ca2+ ions onto the negatively charged surface carboxylate groups of ToCNF and Fmoc-FF is analyzed by zeta potential (ζ) measurements. Small-angle X-ray scattering measurements give deeper structural insights into the interaction of Fmoc-FF with ToCNF. Cell responses to the hydrogels are studied in human dermal fibroblasts (NHDFs) in a direct contact test using a live/dead assay and in extract test using Alamar Blue and lactate dehydrogenase assays. The results show that high loading of Fmoc-FF decreases cell viability, while additional cross-linking with calcium reduces this cytotoxic effect.

Authors

Institutions

Publication Details

Journal
ACS Applied Nano Materials
Published
2025-09-16
DOI
https://doi.org/10.1021/acsanm.5c03356
Citations
1
Primary Topic
Supramolecular Self-Assembly in Materials
Type
article
Field-Weighted Citation Impact
0.60
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

3D Printable Hydrogel Based on TEMPO-Oxidized Cellulose Nanofibrils and Fmoc-FF for Enhanced Biological Performance and Cell Adhesion

Jakob Benedikt Mietner, Daria Zaytseva‐Zotova, Sarathlal Koyiloth Vayalil, Benedikt Sochor et al.
1 citations
ACS Applied Nano Materials
Supramolecular Self-Assembly in Materials
0.60
article

3D Printable Hydrogel Based on TEMPO-Oxidized Cellulose Nanofibrils and Fmoc-FF for Enhanced Biological Performance and Cell Adhesion

Jakob Benedikt Mietner, Daria Zaytseva‐Zotova, Sarathlal Koyiloth Vayalil, Benedikt Sochor, Shouzheng Chen, Julien R. G. Navarro, Feras Dalloul, Enguerrand Barba, Hanna Tiainen, Dhanya Raveendran, Peter Müller‐Buschbaum, Stephan Volkher Roth
article en
1 citations

Abstract

Herein, we report a 3D printable ink made of a peptide-polysaccharide hybrid hydrogel composed of fluorenylmethyloxycarbonyl-diphenylalanine (Fmoc-FF) peptide and TEMPO-oxidized cellulose nanofibrils (ToCNF), synthesized using a pH-dependent sol–gel transition method. The ToCNF suspension is synthesized through the mechanical breakdown of a cellulose pulp using a microfluidizer, followed by its oxidation mediated with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO). The properties of the hybrid inks are compared in the presence (ToCNF/Fmoc-FF-Ca2+) and absence (ToCNF/Fmoc-FF) of the divalent cation Ca2+, which acts as the cross-linker, at two optimized weight ratios (r) of ToCNF and Fmoc-FF (r = 4.5 and 6.5). The rheological measurements show that the yield strength of the ToCNF/Fmoc-FF-Ca2+ gel is almost double that of the hydrogel composite without Ca2+ ions, especially at the concentration (C) of 10 mM CaCl2. This finding is further verified by 3D gel printing, which produced good quality prints with the cation cross-linked hydrogel. The structural analysis by Field Emission Scanning Electron Microscopy shows that the calcium ions can cross-link the ToCNF and also enhance the self-assembly of Fmoc-FF, which leads to the formation of rigid compact nanofibers even at physiological pH. The electrostatic interaction of the positively charged Ca2+ ions onto the negatively charged surface carboxylate groups of ToCNF and Fmoc-FF is analyzed by zeta potential (ζ) measurements. Small-angle X-ray scattering measurements give deeper structural insights into the interaction of Fmoc-FF with ToCNF. Cell responses to the hydrogels are studied in human dermal fibroblasts (NHDFs) in a direct contact test using a live/dead assay and in extract test using Alamar Blue and lactate dehydrogenase assays. The results show that high loading of Fmoc-FF decreases cell viability, while additional cross-linking with calcium reduces this cytotoxic effect.

ACS Applied Nano MaterialsVol. 8(38)
Lawrence Berkeley National Laboratory (US), Universität Hamburg (DE), University of Oslo (NO), Deutsches Elektronen-Synchrotron DESY (DE), Institute of Clinical Research (US), Innovation Cluster (Canada) (CA), Universidad Politécnica de El Salvador (SV), Technical University of Munich (DE), KTH Royal Institute of Technology (SE)
Openalex Percentile: Top 29%
Supramolecular Self-Assembly in Materials
0.60
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.