Research on the Shear Performance of Undulating Jointed Rammed Earth Walls with Comparative Tests

Rammed earth (RE) dwellings are characterized by accessible materials, low cost, and environmental sustainability. However, their poor seismic resistance limits their application. To address this issue, three conventional technical approaches have been developed: (1) adding cement to improve strength; (2) improving structural integrity using reinforced concrete ring beams and columns; and (3) embedding vertical steel bars in order to provide resistance against horizontal seismic actions. While effective, these methods rely on energy-intensive materials with high carbon emissions. In this study, we analyze the seismic damage characteristics and construction mechanisms of RE walls. The results reveal that the horizontal joints in RE walls significantly weaken their resistance to horizontal seismic actions. To mitigate this, three types of undulating joints are proposed and six specimens tested. The maximum horizontal loads of the specimens with local subsidence-type joints are 132.44 kN and 135.41 kN, respectively, which are approximately 50% higher than specimens with horizontal joints, whose maximum horizontal loads are 80.7 kN and 85.83 kN, respectively, while the maximum horizontal loads of the specimens with horizontally concatenated gentle arc-type joints are 151.17 kN and 173.58 kN, respectively, and they exhibit nearly double the shear capacity of the specimens with horizontal joints. Building on these findings and test results, we also include recommendations for integrating elegant RE wall texture design with seismic-resistant undulating joint technology.