Active Nanofluids for Enhanced Shale Oil Recovery: Synergistic Imbibition and Multiscale Pore Access

Shale oil development faces challenges such as rapid production decline and high-cost formation damage caused by refracturing. To address these issues, this study proposes an active silica-based nanofluid with a total concentration of 0.12 wt % (0.045 wt % nanoparticles and 0.075 wt % AES surfactant). Dynamic light scattering (DLS) analysis demonstrates that the nanofluid exhibits excellent stability under high-temperature and high-salinity conditions (90 °C, salinity of 1.0 × 105 mg/L), maintaining an average hydrodynamic diameter of approximately 22 nm, which is significantly smaller than that of the unmodified system (30 nm). Interfacial tension (IFT) measurements revealed a stable IFT of 0.358 mN/m at a concentration of 0.3 wt %, while dynamic contact angle tests confirmed its strong wettability alteration capability. Spontaneous imbibition experiments revealed enhanced oil recovery, with increases of 23.8 and 10.62% compared to simulated formation water (SF water) and AES alone, respectively. Additionally, results indicated that higher core permeability facilitated easier oil–water extraction, while oil saturation primarily influenced oil–water displacement through the starting pressure gradient. A multiscale pore classification model was established by integrating nuclear magnetic resonance (NMR), mercury intrusion porosimetry (MIP), and nitrogen adsorption analysis, enabling the quantification of oil contributions from different pore size ranges: micropores (<0.07 μm) contributed 50.94%, macropores (>3.67 μm) 28.92%, and mesopores (0.07–3.67 μm) 20.15%. These results demonstrate its crucial role in overall oil recovery during shale imbibition. Finally, the mechanism behind enhanced recovery was elucidated through synergistic wettability alteration and capillary displacement equations. This work presents a cost-effective nanofluid formulation and a multiscale pore analysis methodology, providing practical approaches and theoretical insights for enhancing shale oil recovery.

Authors

Institutions

Publication Details

Journal
Energy & Fuels
Published
2025-09-16
DOI
https://doi.org/10.1021/acs.energyfuels.5c03641
Citations
1
Primary Topic
Enhanced Oil Recovery Techniques
Type
article
Field-Weighted Citation Impact
1.15
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Active Nanofluids for Enhanced Shale Oil Recovery: Synergistic Imbibition and Multiscale Pore Access

Liangfei Xiao, Hao Zheng, Yizheng Zhang, Caili Dai et al.
1 citations
Energy & Fuels
Enhanced Oil Recovery Techniques
1.15
article

Active Nanofluids for Enhanced Shale Oil Recovery: Synergistic Imbibition and Multiscale Pore Access

Liangfei Xiao, Hao Zheng, Yizheng Zhang, Caili Dai, Na Zhao, Long Yuan, Yiming Zhang, Zixuan Wang, M.L. Gao
article en
1 citations

Abstract

Shale oil development faces challenges such as rapid production decline and high-cost formation damage caused by refracturing. To address these issues, this study proposes an active silica-based nanofluid with a total concentration of 0.12 wt % (0.045 wt % nanoparticles and 0.075 wt % AES surfactant). Dynamic light scattering (DLS) analysis demonstrates that the nanofluid exhibits excellent stability under high-temperature and high-salinity conditions (90 °C, salinity of 1.0 × 105 mg/L), maintaining an average hydrodynamic diameter of approximately 22 nm, which is significantly smaller than that of the unmodified system (30 nm). Interfacial tension (IFT) measurements revealed a stable IFT of 0.358 mN/m at a concentration of 0.3 wt %, while dynamic contact angle tests confirmed its strong wettability alteration capability. Spontaneous imbibition experiments revealed enhanced oil recovery, with increases of 23.8 and 10.62% compared to simulated formation water (SF water) and AES alone, respectively. Additionally, results indicated that higher core permeability facilitated easier oil–water extraction, while oil saturation primarily influenced oil–water displacement through the starting pressure gradient. A multiscale pore classification model was established by integrating nuclear magnetic resonance (NMR), mercury intrusion porosimetry (MIP), and nitrogen adsorption analysis, enabling the quantification of oil contributions from different pore size ranges: micropores (<0.07 μm) contributed 50.94%, macropores (>3.67 μm) 28.92%, and mesopores (0.07–3.67 μm) 20.15%. These results demonstrate its crucial role in overall oil recovery during shale imbibition. Finally, the mechanism behind enhanced recovery was elucidated through synergistic wettability alteration and capillary displacement equations. This work presents a cost-effective nanofluid formulation and a multiscale pore analysis methodology, providing practical approaches and theoretical insights for enhancing shale oil recovery.

Energy & FuelsVol. 39(38)
Sinopec (China) (CN), Ministry of Education (NZ), Henan Province Quality and Technical Supervision Bureau (CN), State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation (CN), Daqing Oilfield General Hospital (CN), Petroleum Technology Company (Norway) (NO), Guangdong Testing Institute for Product Quality Supervision (CN), China University of Petroleum, East China (CN)
Openalex Percentile: Top 19%
Enhanced Oil Recovery Techniques
1.15
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.