Influence of Inhomogeneous Plastic Strain and Crystallographic Orientations on Fatigue-Induced Dislocation Structures in FCC Metals

Owing to the differences in crystallographic orientations among individual grains, dislocation structures in polycrystals are inherently inhomogeneous from grain to grain. Since intergranular incompatibility is inevitable during plastic deformation, it may consequently lead to unpredictable plastic strain localization, which in turn facilitates the initiation of fatigue crack. Therefore, to elucidate the mechanisms underlying inhomogeneous deformation in polycrystals, this study systematically examines the fatigue-induced dislocation structures in polycrystalline SUS316L stainless steel. We then directly compare them with those in copper single crystals to clarify the dependence of the dislocation structures on crystallographic orientation. SEM characterization demonstrates that high plastic strain near grain boundaries promotes the formation of secondary cell bands (CBs) overlapping the primary CBs, which is attributable to the simultaneous activation of multiple-slip systems under high plastic strain amplitudes. In addition to strain localization, competition among candidate secondary slip systems strongly governs the dislocation structures. Notably, a new type of deformation band (DB) on the (010) plane is identified in a non-coplanar double-slip-oriented grain, a feature not observed in single crystals, indicating that polycrystals accommodate plastic strain through distinct mechanisms. Detailed dislocation structure analysis provides theoretical guidance for mitigating fatigue crack initiation through the manipulation of dislocations.