Determination of the Image Quality in Computed Tomography and its Standardisation

X-Ray Computed tomography (XCT) has become an important non-destructive quality assurance technique in industry. Consequently, standards for quality insurance of XCT and on its performance are required to support industrial XCT users for reliable production. This performance is determined by analysis of the quality of the images produced and by the dimensional measurement accuracy achieved for a given XCT parameter setting. Until recently, standards assessed image quality solely in terms of contrast sensitivity and spatial resolution. Detection limits could not be predicted until now. A new term is introduced: The Detail Detection Sensitivity (DDS). It depends on the contrast sensitivity as a function of contrast and noise, and on the spatial resolution. The spatial frequency needs to be implemented into the analysis to consider sensitivity as a function of the size of an indication. The contrast sensitivity is quantified by the Contrast Discrimination Function (CDF) and the spatial resolution by the Modulation Transfer Function (MTF). The numerical DDS is determined for air flaws from the Contrast Detection Diagram (CDD) at 100% contrast. However, some XCT operators prefer visual determinations rather than numerical ones. To face this need, the SensMonCTII project proposes a new Image Quality Indicator (IQI), consisting of a disk with holes of different sizes for visual DDS determination. The project aims to produce a new ISO standard draft providing a practice to evaluate numerically the XCT image quality via MTF, CDF, CDD and DDS, as well as to evaluate visually the DDS from the hole visibility of a disk IQI. The paper does not address the performance of XCT in terms of dimensional measurement accuracy, but focuses on the performance of XCT in terms of image quality. It describes the methodology to evaluate the image quality, including DDS for the first time.