Coordinated Motion Pattern of Dual Forging Manipulators Based on Forging Deformation Behavior and Press Kinematics

To address the challenges of short allowable motion windows and complex motion planning inherent in dual forging manipulator systems, this study proposes a coordinated motion pattern tailored to dual-manipulator operations, focusing on forging deformation behavior and press control characteristics. First, six representative long-shaft forging materials were classified based on typical industrial applications. Using DEFORM-3D (V11.0) software, the deformation process during the elongation operation was analyzed, and the velocity and displacement characteristics at both ends of the forgings were extracted to clarify the compliant motion requirements of the grippers. Next, a segmented computation method for manipulator allowable motion time was developed based on the motion–time curve of the hydraulic press, significantly improving the time utilization efficiency for coordinated control. Furthermore, experimental tests were carried out to verify the dynamic response performance and motion accuracy of the dual-manipulator system. Finally, the dual-manipulator forging cycle was systematically divided into four stages—pre-forging adjustment, inter-pass compliance, execution phase, and forging completion—resulting in a structured and implementable coordination control framework. This research provides both a theoretical foundation and practical pathway for achieving efficient and precise coordinated motion control in dual forging manipulator systems, offering strong potential for engineering application and industrial deployment.