Ultrafast Laser Writing of In-Line Filters Based on MZI

In mode-locked fiber lasers and optical sensors, in-line filters are essential components. Fiber-core Mach–Zehnder interferometer (MZI) technology has garnered a lot of research interest for the several manufacturing techniques for in-line MZI filters. Although multi-line inscription is frequently needed in existing methods to attain enough waveguide width, this approach adds complexity to production and may result in compromised waveguide quality. In this work, we present an improved single-line direct-writing method that attains similar MZI filtering results to multi-line scan. Additionally, the MZI filter created with the modified single-line direct-writing technique has a smaller insertion loss and requires less direct-writing energy than the previous single-line direct-writing technique. A 516 μm long MZI-based in-line filter was successfully constructed. The results of the characterization showed a central loss dip at 1089.82 nm, a free-spectral range (FSR) of 141.36 nm, an extinction ratio of 19.69 dB, and an insertion loss of 1.122 dB. This method decreased the insertion loss by a factor of 2.7 for an identical extinction ratio and improved the direct-writing efficiency by a factor of 9 for an equivalent FSR with multi-line scan. There was consistency between the experimental and simulation results. We also took measurements of the MZI’s temperature sensitivity. This work shows notable improvements in waveguide quality and ease of manufacture. This accomplishment lays the groundwork for further advancements in integrated mode-locked fiber laser technology.