Cathode Catalyst PdAgCo/C for Optimal Performance of the Alkaline Anion Exchange Membrane Direct Ammonia Fuel Cells

This investigation addresses the enhancement of ammonia fuel cell performance using Pd (palladium)- and Co (cobalt)-doped cathode catalysts. Initially, the performance of the Ag/C cathode catalyst in ammonia fuel cells yielded a baseline power density of only 38 mW/cm2. To improve efficiency, Pd and Co were introduced, resulting in the synthesis of a new 15 wt% PdAgCo/C (15 wt% PdAgCo and 85 wt% C) cathode catalyst, which increased the power density to 74 mW/cm2. Further performance enhancement was achieved by using a highly efficient 40 wt% PtIr/C anode catalyst, as reported in the literature, and applying a cathode catalyst loading of 0.5 mg/cm2, raising the power density to 172 mW/cm2. This investigation addresses the successful synthesis of a 15 wt% PdAgCo/C cathode catalyst, which has proven to be a better choice over conventional catalysts, along with the significance of doping Pd and Co with Ag/C in the augmentation of catalytic activity and fuel cell performance. Thus, a series of physicochemical and electrochemical characterizations, the approach for optimization of the working parameters, and the impact analysis of catalyst loading have all resulted in the achievement of an impeccable power density of 332 mW/cm2.