Use of Expansive Agents to Increase the Sustainability and Performance of Heat-Cured Concretes

Heat-curing processes are often used to ensure the production rate of precast concrete elements, as this process increases the early strength of the material. However, the increase in curing temperature can negatively affect the final mechanical properties since cracking, and especially high porosity, may occur under these conditions. In order to compensate for the expected loss in mechanical and durability-related properties, the cement content is typically increased. This solution raises the cost of the final product and reduces its sustainability. Thus, in this study, the development of expansive self-compacting concretes (SCCs) is proposed to achieve higher final mechanical properties without increasing cement contents. The mechanical properties, expansive performance, and porous microstructure have been evaluated under different curing regimes. The obtained results show that it is possible to obtain similar or even better mechanical performance in expansive concretes cured at high temperatures than in those cured in standard conditions, particularly when using ettringite-based expansive agents (EAs). Moreover, the use of limestone filler (LF) proved to be more suitable than the use of fly ashes in the working conditions evaluated in the present study. In this sense, the compressive strength at 28 days of SCC with LF and ettringite-based EAs is 4.3% higher than the one obtained under standard curing; moreover, the total porosity is reduced (5%), and the drying shrinkage is also limited. These aspects have not been previously reported in non-expansive heat-cured concretes and represent a unique opportunity to reduce the cement content and, therefore, the carbon footprint of precast concretes without reducing their mechanical properties. When using CaO-based EAs, the results are also better than those of non-expansive SCC, although the improvement is less pronounced than in the previous case.