In Vitro Assessment of the Performance of Collagen-Based Polymer Matrices for Tissue Engineering

Background : The development of materials capable of regenerating damaged tissues and their implementation in medical practice is a promising direction in tissue engineering and regenerative medicine. Objective : To investigate physicomechanical and chemical properties of marine collagen-based matrices for tissue engineering through in vitro experiments. Materials and methods : The study materials included two experimental marine collagen-based matrices: one was produced using 10% glutaraldehyde as a cross-linking agent (Group 1), while 10% glyoxal was added during the production of the second sample (Group 2). A bovine collagen-based matrix served as the control (Group 3). The deformation degree, sorption capacity, adhesion degree, and pH were determined. Statistical analysis was performed using Statistica 13.0 Pro (Dell Software, USA). Results : The deformation degree in group 3 was 8.11% lower than in group 1 (Р = .99) and 31.88% lower than in group 2 (Р = .0053). The sorption capacity (mass) in group 3 was 7.2 times higher than in group 1 (Р = .0144) and 18.22 times higher than in group 2 (Р = .0001). The sorption capacity (volume) in group 3 was 4 times higher than in group 1 (Р = .0102) and 7.88 times higher than in group 2 (Р = .0001). The adhesion degree in group 1 was 1.32 times higher than in group 2 (Р ≥ .05) and 1.09 times higher than in group 3 (Р ≥ .05). The pH level in group 3 was 1.12 times higher than in group 1 (Р ≥ .05) and 1.17 times higher than in group 2 (Р = .0383). Conclusions : The performance analysis revealed numerous shortcomings of the pilot samples with 10% glyoxal, warranting their exclusion from further studies. The samples with 10% glutaraldehyde demonstrated comparable or superior performance to the control group.