Design and Performance of a Gravity Water Fed In‐Duct Crossflow Turbine for Hydropower Generation

In Kenya, 70% of households are connected to the grid; however, the consumption of electricity, among households, has reduced by 30%. To address power accessibility inadequacy, especially in rural areas, and develop an appropriate in‐duct hydropower (HP) generation system, several horizontal crossflow turbine prototypes were designed based on the field survey data collected from existing pressurized water supply ducts. An assessment carried on water supply schemes in Makueni County led to gathering and mapping required data that included; pipelines of diameters ranging from 50 to 200 mm, water pipe slopes of lengths ranging from 40 to 800 m, slope elevation heads between 14 and 183 m, and 33 potential HP sites with HP production capacity between 0.59 and 23.63 kilowatts. Various horizontal crossflow turbines were designed, fabricated, and tested for HP generation performance. The designed horizontal crossflow turbine has specifications that include a 0.99 mm diameter ( D o ) impeller that rotates clockwise, 12.5 mm blade radius of curvature, 0.7033 turbine efficiency, turbine inner diameter of 30 mm (D30), 10 blades (B10), 100 mm diameter pipe, turbine speed of 2210 revolutions per minute (RPM) and production of 5.92 V at a head of 6 m hence making a turbine designed and designated as D30B10. It provides savings on power cost to the extent that in 7.5 years’ time, an institution would have saved enough funds to install a new station. On the basis of these findings, it was concluded that in‐duct power generation technology is a promising energy harvesting system for rural communities. HP from ducts provides a paradigm shift to the rural communities’ source of energy and its use, hence reducing the use of firewood for cooking, which is at 89% and effectively reducing deforestation. More studies are recommended to prototype a full‐scale product of the D30B10 turbine to improve technologies for harnessing HP from existing gravity water ducts.

Authors

Institutions

Publication Details

Journal
International Journal of Energy Research
Published
2025-01-01
DOI
https://doi.org/10.1155/er/7974511
Primary Topic
Cavitation Phenomena in Pumps
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Design and Performance of a Gravity Water Fed In‐Duct Crossflow Turbine for Hydropower Generation

Isaiah Omosa, Thomas Thoruwa, Job Kitetu
International Journal of Energy Research
Cavitation Phenomena in Pumps
article

Design and Performance of a Gravity Water Fed In‐Duct Crossflow Turbine for Hydropower Generation

Isaiah Omosa, Thomas Thoruwa, Job Kitetu
article en

Abstract

In Kenya, 70% of households are connected to the grid; however, the consumption of electricity, among households, has reduced by 30%. To address power accessibility inadequacy, especially in rural areas, and develop an appropriate in‐duct hydropower (HP) generation system, several horizontal crossflow turbine prototypes were designed based on the field survey data collected from existing pressurized water supply ducts. An assessment carried on water supply schemes in Makueni County led to gathering and mapping required data that included; pipelines of diameters ranging from 50 to 200 mm, water pipe slopes of lengths ranging from 40 to 800 m, slope elevation heads between 14 and 183 m, and 33 potential HP sites with HP production capacity between 0.59 and 23.63 kilowatts. Various horizontal crossflow turbines were designed, fabricated, and tested for HP generation performance. The designed horizontal crossflow turbine has specifications that include a 0.99 mm diameter ( D o ) impeller that rotates clockwise, 12.5 mm blade radius of curvature, 0.7033 turbine efficiency, turbine inner diameter of 30 mm (D30), 10 blades (B10), 100 mm diameter pipe, turbine speed of 2210 revolutions per minute (RPM) and production of 5.92 V at a head of 6 m hence making a turbine designed and designated as D30B10. It provides savings on power cost to the extent that in 7.5 years’ time, an institution would have saved enough funds to install a new station. On the basis of these findings, it was concluded that in‐duct power generation technology is a promising energy harvesting system for rural communities. HP from ducts provides a paradigm shift to the rural communities’ source of energy and its use, hence reducing the use of firewood for cooking, which is at 89% and effectively reducing deforestation. More studies are recommended to prototype a full‐scale product of the D30B10 turbine to improve technologies for harnessing HP from existing gravity water ducts.

International Journal of Energy ResearchVol. 2025(1)
Kenyatta University (KE), Pwani University (KE)
Openalex Percentile: Top 74%
Cavitation Phenomena in Pumps
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.