Seismic Stability Analysis of Water-Saturated Composite Foundations near Slopes

The seismic bearing capacity of water-saturated composite foundations adjacent to slopes is critical for engineering safety, yet it is significantly influenced by complex factors such as earthquakes and heavy rainfall. This paper establishes a failure mechanism model that involves both reinforced and non-reinforced zones, comprehensively considering the synergistic effects of seismic force, pore water pressure and group pile replacement rate, and thus addressing the issue that existing models struggle to account for the coupling effects of multiple factors. Based on the principle of virtual work, a general solution for ultimate bearing capacity is derived, and the optimal solution is obtained using the MATLAB R2023a exhaustive method. Findings reveal that pile group support substantially enhances bearing capacity: the improvement becomes more pronounced with higher soil strength parameters (φ, c) and replacement ratios. When the seismic acceleration coefficient increases from 0 to 0.3, the bearing capacity of the unreinforced foundation decreases by approximately 61.6% (from 134.71 kPa to 51.83 kPa), while group pile support can increase the bearing capacity by 433.2%. Notably, when soil strength is inherently high, the marginal benefit of pile group reinforcement diminishes. A case study in Fuzhou validates through numerical simulation that pile groups improve foundation stability by altering energy dissipation distribution, with the discrepancy between theoretical calculations and simulation results within 10%. The research results can directly guide the design of saturated composite foundations near slopes in earthquake-prone areas (such as Fujian and Guangdong) and enhance the seismic safety reserve by optimizing the replacement rate of group piles (recommended to be 0.2~0.3).