Analisis Efektivitas Predictive Maintenance dalam Mengoptimalkan Cost Avoidance pada Final Drive Komatsu PC200-8

This study analyzes the effectiveness of implementing predictive maintenance (PdM) on the final drive components of the Komatsu PC200-8 unit at PT. Antareja Mahada Makmur, Site PT. Multi Harapan Utama, East Kalimantan, in an effort to reduce downtime and operational losses. Before the implementation of PdM in 2022, there were 12 repair cases for the final drive with a total downtime of 772.1 hours, repair costs amounting to IDR 310.6 million, rental income loss of IDR 208.03 million, and total losses of IDR 518.63 million. In 2023, during the PdM transition phase, the number of cases decreased to 4, with a total loss of IDR 252.05 million, although downtime remained high (714.6 hours) due to the limited scope of PdM implementation on certain units and components. In 2024, with full PdM implementation, the number of repair cases decreased to 5, with total downtime of only 96 hours and losses of IDR 45.75 million. The cost of PdM implementation for the year was only IDR 21.9 million. As of July 2025, no further damage to the final drive has been recorded, demonstrating a significant improvement in equipment reliability. The reduction in total losses from 2022 to 2024 amounted to IDR 472.88 million, indicating PdM’s effectiveness in avoiding significant costs through condition monitoring methods such as oil analysis, magnetic plug rating, thermal inspection, and oil leak testing (floating seal). The findings of this study confirm that PdM is effective in reducing downtime, repair costs, and enhancing asset management in the mining sector. It also improves equipment reliability and overall operational efficiency, proving PdM to be a successful strategy in reducing losses, increasing productivity, and supporting the sustainability of company operations.