CONTACT PROBLEM WITH A SEMI-STRIP DEFORMABLE STAMP

The paper presents one of the methods for studying the contact problem for a deformable stamp on a layered deformable anisotropic composite, considered in the half-band region. Studying this contact problem would be impossible without a solution. Two previously studied contact problems are on the effect of a strip deformable stamp on an anisotropic composite and on the effect of an absolutely rigid half-strip stamp on the same medium. The first task showed a way to form a deformable stamp of arbitrary rheology. A method for constructing dispersion equations for determining discrete resonant frequencies, previously discovered by Academician I.I. Vorovich in contact problems with a deformable die, was also extracted from it. In addition, it developed an approach that makes it possible to build an accurate solution for a strip stamp using the Newton – Kantorovich method, starting from the parameters for both wide strips and narrow strips. It should be noted that the construction of solutions for dynamic contact problems turned out to be possible due to the use of the Mandelstam – Ignatovsky principle in integral equations to correctly describe the properties of solutions at infinity. But if, for the case of a stripe stamp, you can call If there are other approaches to approximate analytical or numerical construction of approximate solutions, then in the case of a half-strip stamp with an absolutely rigid stamp, the performed study was the only one. It incorporated both a number of approaches for the case of a strip stamp, and a new, first-developed approach to solving contact problems with a piecewise smooth boundary. In the problem with the case Compared to the case of an absolutely rigid die, there was a problem with constructing a block element with a carrier in the half-strip, which had not been done before. In this paper, this problem is solved for the first time, which made it possible to study the contact problem with a deformable stamp in such a field and construct its approximate solution with all the basic properties.

Authors

Institutions

Publication Details

Journal
Problems of Strength and Plasticity
Published
2025-01-01
DOI
https://doi.org/10.32326/1814-9146-2025-87-2-253-262
Primary Topic
Contact Mechanics and Variational Inequalities
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

CONTACT PROBLEM WITH A SEMI-STRIP DEFORMABLE STAMP

О. М. Бабешко, В. А. Бабешко, О. В. Евдокимова
4 links
Problems of Strength and Plasticity
Contact Mechanics and Variational Inequalities
article

CONTACT PROBLEM WITH A SEMI-STRIP DEFORMABLE STAMP

О. М. Бабешко, В. А. Бабешко, О. В. Евдокимова
article en

Abstract

The paper presents one of the methods for studying the contact problem for a deformable stamp on a layered deformable anisotropic composite, considered in the half-band region. Studying this contact problem would be impossible without a solution. Two previously studied contact problems are on the effect of a strip deformable stamp on an anisotropic composite and on the effect of an absolutely rigid half-strip stamp on the same medium. The first task showed a way to form a deformable stamp of arbitrary rheology. A method for constructing dispersion equations for determining discrete resonant frequencies, previously discovered by Academician I.I. Vorovich in contact problems with a deformable die, was also extracted from it. In addition, it developed an approach that makes it possible to build an accurate solution for a strip stamp using the Newton – Kantorovich method, starting from the parameters for both wide strips and narrow strips. It should be noted that the construction of solutions for dynamic contact problems turned out to be possible due to the use of the Mandelstam – Ignatovsky principle in integral equations to correctly describe the properties of solutions at infinity. But if, for the case of a stripe stamp, you can call If there are other approaches to approximate analytical or numerical construction of approximate solutions, then in the case of a half-strip stamp with an absolutely rigid stamp, the performed study was the only one. It incorporated both a number of approaches for the case of a strip stamp, and a new, first-developed approach to solving contact problems with a piecewise smooth boundary. In the problem with the case Compared to the case of an absolutely rigid die, there was a problem with constructing a block element with a carrier in the half-strip, which had not been done before. In this paper, this problem is solved for the first time, which made it possible to study the contact problem with a deformable stamp in such a field and construct its approximate solution with all the basic properties.

Problems of Strength and PlasticityVol. 87(2)
Kuban State University (RU), Russian Academy of Sciences (RU), Southern Scientific Center (RU)
Openalex Percentile: Top 76%
Contact Mechanics and Variational Inequalities
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.