An Economically Viable Minimalistic Solution for 3D Display Discomfort in Virtual Reality Headsets Using Vibrating Varifocal Fluidic Lenses

Herein, we report a USB-powered VR-HMD prototype integrated with our 33 mm aperture varifocal liquid lenses and electronic drive components, all assembled in a conventional VR-HMD form-factor. In this volumetric-display-based VR system, a sequence of virtual images are rapidly flash-projected at different plane depths in front of the observer and are synchronized with the correct accommodations provided by the varifocal lenses for depth-matched focusing at chosen sweep frequency. This projection mechanism aids in resolving the VAC that is present in conventional fixed-depth VR. Additionally, this system can address refractive error corrections like myopia and hyperopia for prescription users and do not require any eye-tracking systems. We experimentally demonstrate these lenses can vibrate up to frequencies approaching 100 Hz and report the frequency response of the varifocal lenses and their focal characteristics in real time as a function of the drive frequency. When integrated with the prototype’s 120 fps VR display system, these lenses produce a net diopter change of 2.3 D at a sweep frequency of 45 Hz while operating at ~70% of its maximum actuation voltage. The components add a total weight of around 50 g to the off-the-shelf VR set, making it a cost-effective but lightweight minimal solution.