Push-Out Bond Strength of Three Bioceramic Sealers to Root Canal Dentin After Different Irrigation Protocols

The adhesion of endodontic sealers to dentin may be influenced both by the chemical composition of the sealer and the final irrigation protocol. The aim of this study was to examine the push-out bond strength of three differently formulated bioceramic sealers to root canal dentin, after different irrigation protocols. Four cavities were prepared in dentine discs obtained from middle thirds of third molars with fused roots. Discs were randomly divided into three groups (n = 8). Group 1: specimens were immersed in 2.5% NaOCl; group 2: in 2.5% NaOCl followed by 17% EDTA; and group 3: in a solution of 2.5% NaOCl with 9% etidronic acid (HEDP). The cavities on each disk were filled with four tested sealers: AH Plus Bioceramic, Bio C Angelus, BioRoot RCS, and AH Plus (n = 8 per sealer). The push-out bond strength test was performed after 7 days. The data were statistically analyzed using two-way analysis of variance with the Bonferroni post hoc test (α = 0.05). Irrigation with NaOCl resulted in significantly lower bond strength values of the sealers in comparison to NaOCl/EDTA and NaOCl/HEDP groups. In the NaOCl and NaOCl/HEDP groups, BioRoot RCS showed similar push-out bond strength compared to AH Plus and significantly higher compared to Bio-C and AH Plus Bioceramic. In the NaOCl/EDTA group, bioceramic sealers achieved a significantly weaker bond strength compared to AH Plus. The bond strength of BioRoot RCS was significantly higher compared to Bio-C and AH Plus Bioceramic. The irrigation protocols and the chemical composition of the sealers significantly influenced their bond strength to dentin. Epoxy resin-based sealer achieved the strongest bond strength, while within bioceramic sealers, the highest values were obtained for BioRoot RCS and the lowest for AH Plus Bioceramic.