Analysis of the influence of the dressing feed rate of a grinding wheel with sintered corundum on the surface roughness of AMS6308 steel after carburising in plunge grinding
The influence of the grinding wheel dressing speed on the surface roughness of AMS6308 steel after carburising during plunge grinding was investigated.A single-grain CVD diamond dresser and a grinding wheel with a 50% admixture of sintered corundum were applied.An increase in the dressing feed rate resulted in an increase in the surface roughness parameters after grinding.KEYWORDS: plunge grinding,
Authors
- Witold Habrat (ORCID: https://orcid.org/0000-0002-9010-8175)
- Marcin Sałata (ORCID: https://orcid.org/0000-0002-2338-4380)
- Tomasz Ordon (ORCID: https://orcid.org/0000-0001-5257-2199)
Publication Details
- Journal
- Mechanik
- Published
- 2025-08-26
- DOI
- https://doi.org/10.17814/mechanik.2025.8-9.7
- Primary Topic
- Engineering Technology and Methodologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00