Mechanical Behavior of Paving Stones Made from Construction and Demolition Waste (CDW)

This study investigates the mechanical performance of concrete paving stones manufactured with recycled aggregates derived from TransMilenio slab demolition waste (CDW-A-TS) as a sustainable alternative to conventional natural coarse aggregates (river gravel) and fine aggregates (river sand). Construction and demolition waste from Bogotá’s mass transit system slabs was processed to produce recycled aggregates, which were replaced at substitution levels of 0%, 30%, 50%, and 100% by volume of natural aggregates. The mechanical properties evaluated included compressive strength, flexural strength, abrasion resistance, and water absorption, following Colombian Technical Standards (NTC) and international protocols. Results demonstrate that all CDW-A-TS mixtures exhibit enhanced compressive strength, with improvements ranging from 14.71% to 32.82% compared to the control mix. Flexural strength also increased by 1.34% to 6.13%. However, water absorption increased proportionally with CDW-A-TS content (10.66% to 25.24%). The optimal substitution level was identified at 30% CDW-A-TS based on a composite evaluation of mechanical performance (compressive and flexural strength), durability indicators (water absorption and abrasion resistance), This research demonstrates the technical viability of incorporating TransMilenio demolition waste in paving stone production, contributing to circular economy principles and sustainable urban infrastructure development. This finding aligns with prior research affirming the viability of incorporating recycled coarse aggregates in concrete prefabricates, such as paving stones, for various construction applications.