The Use of Boiler Flue Gases for Absorption Lithium Bromide Heat Pumps in the System of Regenerative Heating of Make-up Water

Increasing the efficiency of primary energy sources use in the production of heat and electricity at thermal power plants is an enduring task in the context of reducing the cost of converted energy flows production and improving the environmental characteristics of a power gene-rating unit. To solve this problem, it is proposed to develop a system for regenerative heating of feedwater via the use of low-temperature waste heat flows from a thermal power plant, which is possible with the integration of heat-recovery heat pumps into the thermal scheme of the station. In this paper, we consider the use of the aforementioned lithium bromide absorption heat pumps driven by flue gases extracted from the steam boiler path and the circulating water stream of the condenser is used as a source of low-potential energy. Depending on the efficiency function, when optimizing the operating mode of the power plant in accordance with the requirements of the power system after modernization, it is possible to reduce the electric power of the turbine, increase it or maintain it at the same level. For each of the three variants, a numerical experiment was conducted for the PT-60 turbine unit, which is the most common in the unified Belarusian Energy System. For the option with a decrease in electrical power, the following results were obtained: an increase in electrical, energy and exergetic efficiency, respectively, amounted to 4.3, 2.6 and 1.1 %, while also reducing the temperature of outgoing flue gases due to their deeper cooling to 110 °C. The paper determines the cross-sections of the gas-air duct of the boiler unit for the selection of flue gases with a temperature that ensures the operation of the absorption heat pump at nominal parameters. The flue exhaust gases of the lithium bromide absorption heat pumps are mixed with the flue gas stream directly from the boiler before being discharged into the smokestack.

Authors

Institutions

Publication Details

Journal
ENERGETIKA Proceedings of CIS higher education institutions and power engineering associations
Published
2025-08-13
DOI
https://doi.org/10.21122/1029-7448-2025-68-4-343-352
Primary Topic
Chemical Looping and Thermochemical Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

The Use of Boiler Flue Gases for Absorption Lithium Bromide Heat Pumps in the System of Regenerative Heating of Make-up Water

V. V. Yanchuk, В. Н. Романюк
ENERGETIKA Proceedings of CIS higher education institutions and power engineering associations
Chemical Looping and Thermochemical Processes
article

The Use of Boiler Flue Gases for Absorption Lithium Bromide Heat Pumps in the System of Regenerative Heating of Make-up Water

V. V. Yanchuk, В. Н. Романюк
article en

Abstract

Increasing the efficiency of primary energy sources use in the production of heat and electricity at thermal power plants is an enduring task in the context of reducing the cost of converted energy flows production and improving the environmental characteristics of a power gene-rating unit. To solve this problem, it is proposed to develop a system for regenerative heating of feedwater via the use of low-temperature waste heat flows from a thermal power plant, which is possible with the integration of heat-recovery heat pumps into the thermal scheme of the station. In this paper, we consider the use of the aforementioned lithium bromide absorption heat pumps driven by flue gases extracted from the steam boiler path and the circulating water stream of the condenser is used as a source of low-potential energy. Depending on the efficiency function, when optimizing the operating mode of the power plant in accordance with the requirements of the power system after modernization, it is possible to reduce the electric power of the turbine, increase it or maintain it at the same level. For each of the three variants, a numerical experiment was conducted for the PT-60 turbine unit, which is the most common in the unified Belarusian Energy System. For the option with a decrease in electrical power, the following results were obtained: an increase in electrical, energy and exergetic efficiency, respectively, amounted to 4.3, 2.6 and 1.1 %, while also reducing the temperature of outgoing flue gases due to their deeper cooling to 110 °C. The paper determines the cross-sections of the gas-air duct of the boiler unit for the selection of flue gases with a temperature that ensures the operation of the absorption heat pump at nominal parameters. The flue exhaust gases of the lithium bromide absorption heat pumps are mixed with the flue gas stream directly from the boiler before being discharged into the smokestack.

ENERGETIKA Proceedings of CIS higher education institutions and power engineering associationsVol. 68(4)
Belarusian National Technical University (BY)
Openalex Percentile: Top 80%
Chemical Looping and Thermochemical Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.