Harnessing and Degradation Mechanism of Persistent Polyethylene Waste by Newly Isolated Bacteria from Waxworm and Termite Gut Symbionts

Pollution from synthetic polymers, particularly low-density polyethylene (LDPE), poses a significant environmental challenge due to its chemical stability and resistance to degradation. This study investigates an eco-biotechnological approach involving bacterial strains isolated from insect guts-<i>Bacillus cereus</i> LDPE-DB2 (from <i>Achroia grisella</i>) and <i>Pseudomonas aeruginosa</i> LDPE-DB26 (from <i>Coptotermes formosanus</i>)-which demonstrate the ability to degrade LDPE, potentially through the action of lignin-modifying enzymes. These strains exhibited notable biofilm formation, enzymatic activity, and mechanical destabilization of LDPE. LDPE-DB2 exhibited higher LDPE degradation efficiency than LDPE-DB26, achieving a greater weight loss of 19.8% compared with 11.6% after 45 days. LDPE-DB2 also formed denser biofilms (maximum protein content: 68.3 ± 2.3 µg/cm²) compared with LDPE-DB26 (55.2 ± 3.1 µg/cm²), indicating stronger surface adhesion. Additionally, LDPE-DB2 reduced LDPE tensile strength (TS) by 58.3% (from 15.3 MPa to 6.4 ± 0.4 MPa), whereas LDPE-DB26 induced a 43.1% reduction (to 8.7 ± 0.23 MPa). Molecular weight analysis revealed that LDPE-DB2 caused a 14.8% decrease in weight-averaged molecular weight (Mw) and a 59.1% reduction in number-averaged molecular weight (Mn), compared with 5.8% and 32.7%, respectively, for LDPE-DB26. Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and gel permeation chromatography (GPC) analyses revealed substantial polymer chain scission and crystallinity disruption. Gas chromatography-mass spectrometry (GC-MS) identified environmentally benign degradation products, including alkanes, alcohols, and carboxylic acids. This study demonstrates a sustainable route to polyethylene biotransformation using insect symbionts and provides insights for scalable, green plastic waste management strategies in line with circular economy goals.