Sliding speed influences electrovibration-induced finger friction dynamics on touchscreens

Electrovibration technology enables tactile texture rendering on capacitive touchscreens by modulating friction between the finger and the screen through electrostatic attraction forces, generated by applying an alternating voltage signal to the screen. Accurate signal calibration is essential for robust texture rendering but remains challenging due to variations in sliding speed, applied force, and individual skin mechanics, all of which unpredictably affect frictional behavior. Here, we investigate how exploration conditions affect electrovibration-induced finger friction on touchscreens and the role of skin mechanics in this process. Ten participants slid their index fingers across an electrovibration-enabled touchscreen at five sliding speeds ( 20 ∼ 100 mm/s) and applied force levels ( 0 . 2 ∼ 0 . 6 N). Contact forces and skin accelerations were measured while amplitude modulated voltage signals spanning the tactile frequency range were applied to the screen. We modeled the finger-touchscreen friction response as a first-order system and the skin mechanics as a mass–spring-damper system. Results showed that sliding speed influenced the friction response’s cutoff frequency, along with the estimated finger moving mass and stiffness. For every 1 mm/s increase in speed, the cutoff frequency, the finger moving mass, and stiffness increased by 13.8 Hz, 3 . 23 × 1 0 − 5 kg, and 4.04 N/m, respectively. Correlation analysis revealed that finger stiffness had a greater impact on the cutoff frequency than moving mass. Notably, we observed a substantial inter-participant variability in both finger-display interaction and skin mechanics parameters. Finally, we developed a speed-dependent friction model to support consistent and perceptually stable electrovibration-based haptic feedback across varying user conditions. • Sliding speed impacts electrovibration-induced finger friction bandwidth. • Applied force does not affect electrovibration-induced finger friction dynamics. • Skin stiffness influences finger-electrovibration bandwidth more than mass does. • Electrovibration-induced finger friction dynamics vary across participants. • A model is proposed to offset for speed-based variations in electrovibration friction.

Authors

Institutions

Publication Details

Journal
Tribology International
Published
2025-08-11
DOI
https://doi.org/10.1016/j.triboint.2025.111054
Primary Topic
Tactile and Sensory Interactions
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Sliding speed influences electrovibration-induced finger friction dynamics on touchscreens

Daan M. Pool, Jagan K. Balasubramanian, Yasemin Vardar
4 links
Tribology International
Tactile and Sensory Interactions
article

Sliding speed influences electrovibration-induced finger friction dynamics on touchscreens

Daan M. Pool, Jagan K. Balasubramanian, Yasemin Vardar
article en

Abstract

Electrovibration technology enables tactile texture rendering on capacitive touchscreens by modulating friction between the finger and the screen through electrostatic attraction forces, generated by applying an alternating voltage signal to the screen. Accurate signal calibration is essential for robust texture rendering but remains challenging due to variations in sliding speed, applied force, and individual skin mechanics, all of which unpredictably affect frictional behavior. Here, we investigate how exploration conditions affect electrovibration-induced finger friction on touchscreens and the role of skin mechanics in this process. Ten participants slid their index fingers across an electrovibration-enabled touchscreen at five sliding speeds ( 20 ∼ 100 mm/s) and applied force levels ( 0 . 2 ∼ 0 . 6 N). Contact forces and skin accelerations were measured while amplitude modulated voltage signals spanning the tactile frequency range were applied to the screen. We modeled the finger-touchscreen friction response as a first-order system and the skin mechanics as a mass–spring-damper system. Results showed that sliding speed influenced the friction response’s cutoff frequency, along with the estimated finger moving mass and stiffness. For every 1 mm/s increase in speed, the cutoff frequency, the finger moving mass, and stiffness increased by 13.8 Hz, 3 . 23 × 1 0 − 5 kg, and 4.04 N/m, respectively. Correlation analysis revealed that finger stiffness had a greater impact on the cutoff frequency than moving mass. Notably, we observed a substantial inter-participant variability in both finger-display interaction and skin mechanics parameters. Finally, we developed a speed-dependent friction model to support consistent and perceptually stable electrovibration-based haptic feedback across varying user conditions. • Sliding speed impacts electrovibration-induced finger friction bandwidth. • Applied force does not affect electrovibration-induced finger friction dynamics. • Skin stiffness influences finger-electrovibration bandwidth more than mass does. • Electrovibration-induced finger friction dynamics vary across participants. • A model is proposed to offset for speed-based variations in electrovibration friction.

Tribology InternationalVol. 213
Delft University of Technology (NL)
Nederlandse Organisatie voor Wetenschappelijk Onderzoek
Affordable and clean energy
Openalex Percentile: Top 79%
Tactile and Sensory Interactions
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.