Potential of CNT-Enhanced Steel-Reinforced Concrete to Reduce the Impact of Water Management Facilities

The growth of urban areas and climate change affect the performance of water management, increasing the rate of flooding and decreasing the quality of available water. To address this issue, the sustainable urban drainage systems (SUDs) and conventional urban drainage systems (UDIs) must be promoted. In both systems, grey infrastructure plays an important role, in the form of reinforced concrete tanks, filters, and water treatment plants. Nowadays, the use of reinforced concrete is a major contributor of the environmental impact of human activities environmental impacts. This study aims to assess the potential of nanoparticle-based concrete to mitigate the environmental impacts of water management facilities. To achieve this target, a comparative Life Cycle Assessment (LCA) analysis was performed on a multi walled carbon nanotubes (MWCNTs) based concrete, and a conventional one. To evaluate the corresponding benefits, a Functional Unit has been defined representing a frequently used element in water management facilities. The conducted review found no similar research. It is noted that the functional units used in published studies on nanoproducts are usually defined for the production of mass units. This study, found that using MWCNT-based concrete reduced the weight of the steel reinforcement by 47%. This reduction in steel outweighs the environmental impacts corresponding to used MWCNTs. The impact scores obtained are significantly lower for the MWCNT-based concrete. Therefore, the use of this material is recommended in Water management facilities, only on an environmental basis. Further investigation is recommended into the economic viability of this use.