Remote-Controlled Measurement System for Sample Signal Generation with Measurement of Selected Parameters of This Signal

The paper describes a computer-controlled teaching station for generating waveforms from samples with measurement of selected parameters of the generated waveform. The control software was written in the LabVIEW environment. It allows you to generate a waveform in this program, visualize the waveform, transfer samples to the digital generator's memory, configure the generator, and remotely measure the rms value with a digital multimeter with a TrueRMS converter. Using a digital oscilloscope, the waveform obtained at the output of the generator is visualized. The made measuring station is used during laboratory classes on the subject of computer measurement systems.