Mechanisms of dust agglomeration and self-cleaning on a superhydrophobic surface during condensation

Dust accumulation on a photovoltaic (PV) surface hinders sunlight transmission, reduces photoelectric efficiency, and poses security risks. Although condensation affects dust agglomeration, self-cleaning superhydrophobic surfaces can effectively remove dust accumulated on a PV surface. However, the mechanism of agglomeration and adhesion of dust particles on the superhydrophobic surface remains unclear. The mechanism of particles carried by jumping droplets on a superhydrophobic surface has not been well understood. Therefore, we performed dust particle agglomeration and self-cleaning experiments on a superhydrophobic surface during condensation. The agglomeration process of dust particles on the superhydrophobic surface was observed using a three-dimensional microscope. We analyzed the causes that facilitate dust removal by droplets jumping away from the superhydrophobic surface. The particle agglomeration process primarily entailed four processes: coalescence of two droplets, coalescence of partially wetted particles and droplets, agglomeration of partially wetted particles, and coalescence of droplets wrapped with multiparticles. We analyzed the mechanisms of condensation-induced droplet jumping and particle agglomeration on the superhydrophobic surface. Droplets jumping away from a superhydrophobic surface can induce the formation of stacked spherical agglomerates. These agglomerates exhibited reduced contact areas and adhesion forces between the agglomerates and superhydrophobic surfaces, which facilitated the removal of dust particles from the surface. The smaller the particles, the better the dust cleaning effectiveness of the droplet jumping phenomenon. In addition, outdoor self-cleaning and wind cleaning simulation experiments were performed to confirm the self-cleaning effect of superhydrophobic surfaces. The obtained results provide a theoretical guidance for the optimal design of self-cleaning surfaces.

Authors

Institutions

Publication Details

Journal
Physics of Fluids
Published
2025-08-01
DOI
https://doi.org/10.1063/5.0276304
Citations
1
Primary Topic
Icing and De-icing Technologies
Type
article
Field-Weighted Citation Impact
4.99

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Mechanisms of dust agglomeration and self-cleaning on a superhydrophobic surface during condensation

Jianlan Li, Guoqiang Hu, Luyi Lu, Yao Zhang et al.
1 citations
Physics of Fluids
Icing and De-icing Technologies
4.99
article

Mechanisms of dust agglomeration and self-cleaning on a superhydrophobic surface during condensation

Jianlan Li, Guoqiang Hu, Luyi Lu, Yao Zhang, Kefei Ma, Zhengzhan Lv
article en
1 citations

Abstract

Dust accumulation on a photovoltaic (PV) surface hinders sunlight transmission, reduces photoelectric efficiency, and poses security risks. Although condensation affects dust agglomeration, self-cleaning superhydrophobic surfaces can effectively remove dust accumulated on a PV surface. However, the mechanism of agglomeration and adhesion of dust particles on the superhydrophobic surface remains unclear. The mechanism of particles carried by jumping droplets on a superhydrophobic surface has not been well understood. Therefore, we performed dust particle agglomeration and self-cleaning experiments on a superhydrophobic surface during condensation. The agglomeration process of dust particles on the superhydrophobic surface was observed using a three-dimensional microscope. We analyzed the causes that facilitate dust removal by droplets jumping away from the superhydrophobic surface. The particle agglomeration process primarily entailed four processes: coalescence of two droplets, coalescence of partially wetted particles and droplets, agglomeration of partially wetted particles, and coalescence of droplets wrapped with multiparticles. We analyzed the mechanisms of condensation-induced droplet jumping and particle agglomeration on the superhydrophobic surface. Droplets jumping away from a superhydrophobic surface can induce the formation of stacked spherical agglomerates. These agglomerates exhibited reduced contact areas and adhesion forces between the agglomerates and superhydrophobic surfaces, which facilitated the removal of dust particles from the surface. The smaller the particles, the better the dust cleaning effectiveness of the droplet jumping phenomenon. In addition, outdoor self-cleaning and wind cleaning simulation experiments were performed to confirm the self-cleaning effect of superhydrophobic surfaces. The obtained results provide a theoretical guidance for the optimal design of self-cleaning surfaces.

Physics of FluidsVol. 37(8)
Huazhong University of Science and Technology (CN)
National Natural Science Foundation of China
Openalex Percentile: Top 5%
Icing and De-icing Technologies
4.99
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.