Wettability and sp2/sp3 ratio effects on supercapacitor performance of N-doped hydrogenated amorphous carbon nanofoam
Pulsed laser-deposited amorphous carbon nanofoams are potential candidate for electrochemical energy storage applications due to ultra-light weight, large volumetric void fractions, and co-existence of sp , sp 2 and sp 3 carbon hybridization. It is known that charge-storage in carbon nanostructures containing disordered sp 2 -domains is determined by their wettability, surface area, and porosity. However, their charge-storage performance is limited to the areal capacitance of the order of a few mF/cm 2 . We enhanced the supercapacitor performance of nitrogen-doped amorphous carbon nanofoam by engineering its wettability and sp 2 -C/ sp 3 -C ratio by vacuum annealing. The specific capacitance was enhanced by about fifty times and the device voltage increased from 0.8 to 1.1 V compared to as-grown carbon nanofoam. In addition, we examined for the first time the initial increase in specific capacitance of the aqueous symmetric supercapacitor with respect to the scan rate, employing in-situ measurements coupling Raman spectroscopy and electrochemistry. We attribute this effect, observed but generally not explained in previous works in the literature, to the electrochemical activation induced by structural changes during the charge storage performance. This optimization of pulsed laser-deposited carbon nanofoam may open an avenue for fabricating lightweight and porous nanostructures for advanced macro-to-micro-supercapacitor devices. • A porous and lightweight N-doped amorphous carbon nanofoam is synthesized. • sp 2 -C/ sp 3 -C ratio and wettability of nanofoam are tuned to examine supercapacitor performance. • Initial increase in capacitance with scan rate is explored by in-situ spectro-electrochemistry. • Nanofoam with optimized properties is anticipated for thin film supercapacitor applications.
Authors
- Gianlorenzo Bussetti (ORCID: https://orcid.org/0000-0001-8556-8014)
- Raffaella Suriano (ORCID: https://orcid.org/0000-0002-7448-359X)
- Andrea Lucotti (ORCID: https://orcid.org/0000-0003-2148-1408)
- Agnieszka Jastrzębska (ORCID: https://orcid.org/0000-0001-8900-1859)
- Carlo S. Casari (ORCID: https://orcid.org/0000-0001-9144-6822)
- Subrata Kr Ghosh (ORCID: https://orcid.org/0000-0002-5189-7853)
- Yurii P. Ivanov (ORCID: https://orcid.org/0000-0003-0271-5504)
- Alberto Calloni (ORCID: https://orcid.org/0000-0002-7389-2703)
- Veronica Piazza (ORCID: https://orcid.org/0000-0002-8470-1773)
- Giorgio Divitini (ORCID: https://orcid.org/0000-0003-2775-610X)
- Andrea Macrelli (ORCID: https://orcid.org/0000-0002-5307-5124)
- Matteo Tommasini (ORCID: https://orcid.org/0000-0002-7917-426X)
- Cinzia Casiraghi (ORCID: https://orcid.org/0000-0001-7185-0377)
- Andrea Li Bassi (ORCID: https://orcid.org/0000-0002-1265-4971)
- Valeria Russo (ORCID: https://orcid.org/0000-0001-9543-0422)
- Giacomo Pagani (ORCID: https://orcid.org/0009-0001-7437-545X)
- Marco Agozzino
Institutions
- Warsaw University of Technology (PL)
- University of Manchester (GB)
- Italian Institute of Technology (IT)
- Politecnico di Milano (IT)
Publication Details
- Journal
- Chemical Engineering Journal
- Published
- 2025-07-24
- DOI
- https://doi.org/10.1016/j.cej.2025.166402
- Citations
- 5
- Primary Topic
- Supercapacitor Materials and Fabrication
- Type
- article
- Field-Weighted Citation Impact
- 2.14