Citric/Acetic Acid-Assisted Hydrothermal Synthesis of Chitosan-Derived Porous Carbon for Supercapacitors

Utilization of abundant renewable resources for preparing green materials for energy storage, such as supercapacitors, is important and challenging. The organic-acid-assisted hydrothermal process has recently emerged to be an effective way to regulate the porous structure of the final activated carbon. In this work, citric/acetic acids are employed as hydrothermal assisting reagents for the carbonization of chitosan prior to KOH activation of the hydrochar, for conducting a comparative study to better understand the effects of these organic acids. The study systematically investigated the impact of the acetic acid/citric acid addition ratio on the products of hydrochar and KOH-activated porous carbon. The results demonstrated that the addition of acetic acid (AC) was more conducive to the development of mesopores, while the addition of citric acid (CA) was more favorable for the development of micropores. The hierarchical distribution of the pore structure resulted from AC hydrothermal exhibiting the optimal electrochemical and cycle life performance at the same concentration. The highest specific surface area (3336 m2/g) was achieved when 0.8 mol/L AC (08ACK3) was added, which was significantly higher compared to those of nonassisted conventional as well as CA hydrothermal. In the three-electrode system, the specific capacitance of 08ACK3 reached 431.5 F/g at 0.5 A/g, which was higher than those of most of the previously reported chitosan-based porous carbon materials. Furthermore, the specific capacity retention was even higher at 10 A/g, which was 96% of the original specific capacitance after 30,000 charge/discharge cycles. Compared to citric acid, which predominantly enhances the total specific surface area by increasing micropores (<2 nm), acetic acid shows a stronger tendency to augment the micro-mesopore (1.1–3 nm) specific surface area, consequently contributing to the overall surface area improvement.

Authors

Institutions

Publication Details

Journal
Energy & Fuels
Published
2025-07-24
DOI
https://doi.org/10.1021/acs.energyfuels.5c01670
Citations
1
Primary Topic
Supercapacitor Materials and Fabrication
Type
article
Field-Weighted Citation Impact
0.43

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Citric/Acetic Acid-Assisted Hydrothermal Synthesis of Chitosan-Derived Porous Carbon for Supercapacitors

Mingtao Zheng, Huashou Li, Chaofan Hu, Jianle Zhuang et al.
1 citations
Energy & Fuels
Supercapacitor Materials and Fabrication
0.43
article

Citric/Acetic Acid-Assisted Hydrothermal Synthesis of Chitosan-Derived Porous Carbon for Supercapacitors

Mingtao Zheng, Huashou Li, Chaofan Hu, Jianle Zhuang, Hanwu Dong, Jiaqi Peng, Fubin Chen, Shanshan Li, Juan Ling
article en
1 citations

Abstract

Utilization of abundant renewable resources for preparing green materials for energy storage, such as supercapacitors, is important and challenging. The organic-acid-assisted hydrothermal process has recently emerged to be an effective way to regulate the porous structure of the final activated carbon. In this work, citric/acetic acids are employed as hydrothermal assisting reagents for the carbonization of chitosan prior to KOH activation of the hydrochar, for conducting a comparative study to better understand the effects of these organic acids. The study systematically investigated the impact of the acetic acid/citric acid addition ratio on the products of hydrochar and KOH-activated porous carbon. The results demonstrated that the addition of acetic acid (AC) was more conducive to the development of mesopores, while the addition of citric acid (CA) was more favorable for the development of micropores. The hierarchical distribution of the pore structure resulted from AC hydrothermal exhibiting the optimal electrochemical and cycle life performance at the same concentration. The highest specific surface area (3336 m2/g) was achieved when 0.8 mol/L AC (08ACK3) was added, which was significantly higher compared to those of nonassisted conventional as well as CA hydrothermal. In the three-electrode system, the specific capacitance of 08ACK3 reached 431.5 F/g at 0.5 A/g, which was higher than those of most of the previously reported chitosan-based porous carbon materials. Furthermore, the specific capacity retention was even higher at 10 A/g, which was 96% of the original specific capacitance after 30,000 charge/discharge cycles. Compared to citric acid, which predominantly enhances the total specific surface area by increasing micropores (<2 nm), acetic acid shows a stronger tendency to augment the micro-mesopore (1.1–3 nm) specific surface area, consequently contributing to the overall surface area improvement.

Energy & FuelsVol. 39(31)
South China Agricultural University (CN), Ministry of Agriculture (BW)
National Natural Science Foundation of China, Key Technologies Research and Development Program of Guangzhou
Openalex Percentile: Top 39%
Supercapacitor Materials and Fabrication
0.43
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.