Energy Theft Identification: A State Estimation Model for Partial Meter Bypass

Energy theft due to illegally bypassing the meter can happen in traditional and smart grids. It is still one of the most frequent types of non-technical losses (NTL) due to the simplicity of connecting the illegal load directly to the distribution cable. Fraudulent consumers tend to report partial loads to avoid suspicion. Connection of illicit loads consisting of one or more electrical appliances is addressed at length in this paper. A novel method is proposed to locate and estimate the amount of theft using a 2-step Kalman filtering process with bias filter for optimization. The schema facilitates estimation of shifting cable impedances under dynamic operating conditions, regardless of whether energy theft is present. On average, energy theft incidents could be identified up to 99% for thefts involving single appliance and 92% for thefts involving multiple appliances. The effectiveness also vary based on the number of premises with energy theft, the load pattern and the type of bias filter applied. Results affirmed that by incorporating an optimization stage with the inclusion of the bias filter eliminates poor estimation, yielding low mean absolute errors for apparent power and power factor of 0.3 volt-ampere and 0.02, respectively. The accuracy and precision of classifying theft-points are close to 100%. A schema is also presented to reduce false identification of honest consumer from 22.6% to 0.5%. In addition, the proposed framework demonstrates robustness against different cable lengths, changes in temperature, cable core material, cable core dimension and cable degradation.