Multi-Physics Modeling and Planning Tool for Tailoring of Quenching Process of Representative Airframe Structural Components

Quenching is the most critical step in the sequence of heat-treating operations, aiming to preserve the solid solution formed at the solution heat-treating temperature by rapidly cooling the material to near room temperature. Currently, there is no reliable, performance-informed quenching process that can consistently reduce the high scrap rate of airframe aluminum forging parts, which often suffer from significant residual stress and distortion. This limitation stems from the complex interactions between temperature, phase transformations, and stress/strain behavior—each influenced by the evolving temperature distribution and microstructural state of the workpiece. Conventional modeling techniques for quenching processes typically lump these multiscale, multi-physics phenomena into a simplified heat transfer coefficient (HTC). However, determining the spatial and temporal variations of HTC through experiments is both prohibitively time-consuming and costly. To address this challenge and enable rapid process tailoring for reduced distortion, we have developed and validated a digital twin-based Quenching Laboratory Software (QLAB) tool. QLAB integrates a thermal multi-phase computational fluid dynamics (CFD) model, sequentially coupled with a Mechanical Threshold Stress (MTS) model and a precipitation model. The thermal CFD component captures turbulent flow, multi-phase transformations, and the complex heat transfer stages of quenching including vapor blanket formation, nucleate boiling, and convection—to accurately predict temperature evolution. The MTS-precipitation model quantifies the effects of microstructural precipitates on the material's mechanical response under thermal loading. QLAB has been thoroughly validated using representative aluminum airframe components, including aluminum bars with pockets and Lcorner parts. We demonstrate the tool's predictive accuracy by comparing its output against experimentally measured temperature and distortion fields. Finally, we apply the validated QLAB to conduct a virtual quenching test on a simplified aluminum airframe structure, showcasing its potential for performance-informed process optimization.