Wind Turbines Power Coefficient Estimation Using Manufacturer�s Information and Real Data

Dynamic modelling of wind turbines and their simulation is a very useful tool for studying their behaviour. One of the key elements concerning the physical models of wind turbines is the power coefficient Cp, which acts as an efficiency in the extraction of power from the wind. Unfortunately, this coefficient is often unknown a priori, as it does not usually appear in the information provided by manufacturers. This paper first describes a methodology for obtaining the power coefficient parameters of a commercial wind turbine model using the power curve provided by the manufacturer, which indicates the theoretical power that the wind turbine can produce at each wind speed. To achieve this, a parameter estimation problem is formulated and solved to determine the power coefficient parameters. Nevertheless, this information is often insufficient, requiring additional knowledge, such as operational data, to improve the fit. Finally, a new parameter estimation is performed using only real data measured from the process, validating the proposed methodology. The operational dataset was obtained from the SMARTEOLE project in France and corresponds to the pitch-controlled variable-speed Senvion MM82/2050 wind turbine.