Fruit Seed Biomass as an Alternative Material to Use in Recycling Processes of Metals from Industrial Waste

The metallurgical industry has been constantly changing over the past decades. On the one hand, there has been the modernization and improvement of production efficiency, and on the other hand, we have seen a reduction in the negative impact on the environment. The possibility of using alternative materials and the circular economy is significant in this area. In the present work, research was carried out to determine the usefulness of biomass in the form of fruit seeds for the recycling processes of metal-bearing raw materials, including slags from copper production processes, which are characterized by a much higher metal content than ores of this metal. The main carbon-bearing material/reducer used in the process is metallurgical coke. The transformation of the European metal industry has been observed in recent years. To carry out the physicochemical characterization of the tested material, a research methodology was adopted using tools to determine the stability of behavior at high temperatures, chemical composition, and volatile components. Thermodynamic analysis was carried out, indicating the theoretical course of reactions of individual system components and thermal effects, allowing a determination of whether the assumed reactions are endothermic or exothermic. The planned research ends with the reduction process in conditions similar to those carried out in industrial conditions. Enforced by the guidelines for reducing CO₂ emissions, it contributes to a significant reduction in the demand for coke. This paper addresses the issue of determining the feasibility of using selected bioreducers, including cherry stones, to verify their suitability in the process of reducing copper oxides. The study used copper slag with a composition similar to slags generated at the copper production stage in a flash furnace. The results obtained in reducing copper content above 98 wt. % indicate the great potential of this type of bioreducer. It should be noted that, unlike conventional fossil fuels, the use of cherry stones to reduce copper slag can be considered an environmentally neutral method of carbon offset. The resulting secondary slag is a waste product that can be stored and disposed of without harmful environmental effects due to its low lead content. An additional advantage is the relatively wide availability of cherry stones.