Analysis of Biochar–Cement Composites by SEM/EDS: Interfacial Interactions and Effects on Mechanical Strength

Portland cement production is one of the main global sources of CO2 emissions, driving the search for sustainable solutions to reduce its environmental footprint. This study evaluated the use of biochar derived from sugarcane bagasse as a partial cement replacement in cementitious composites, aiming to investigate its effects on mechanical and microstructural properties. Composites were prepared with 0, 2, and 5 (% w w−1) biochar at two water-to-cement (w/c) ratios: 0.28 and 0.35. It was hypothesized that the porous structure and carbon-rich composition of biochar could enhance the microstructure of the cementitious matrix and contribute to strength development. Characterization of the biochar indicated compliance with the European Biochar Certificate (EBC) standard, high thermal stability, and notable water retention capacity. Mechanical testing revealed that incorporating 5% w w−1 biochar increased compressive strength by up to 48% in the 0.35 w/c formulation compared to the control. Microstructural analyses (SEM/EDS) showed good interaction between the biochar and the cementitious matrix, with the formation of hydration products at the interfaces. The results confirm the potential of sugarcane bagasse biochar as a supplementary cementitious material, promoting more sustainable composites with improved mechanical performance and reduced environmental impact.