Integration of Shape Memory Alloy Actuators into Sintered Aluminum Structures via Material Extrusion for Aerospace Applications

Reducing structural mass and volume is critical to improving efficiency and payload capacity in next-generation small satellites and CubeSats. Additive manufacturing, particularly material extrusion, offers design flexibility and enables the production of lightweight, functional metallic components. This study investigates the integration of nickel–titanium shape memory alloy wires into aluminum-based matrices using a sinter-based material extrusion process, aiming to develop compact actuator systems for aerospace applications. A customized AlSi7Mg aluminum alloy feedstock was extruded into filament form, printed, and embedded with shape memory alloy wires, allowing consolidation during sintering. X-ray micro-computed tomography was used to analyze internal defects and matrix–wire interfacial contact, before and after sintering. Tensile testing of the embedded actuator structures revealed effective mechanical bonding and actuation behavior. The results demonstrate that controlled shrinkage and interfacial bonding enable reliable embedding of shape memory elements without compromising structural integrity. This work provides a promising framework for developing multifunctional aerospace components, where active actuation and structural efficiency can be combined through advanced material extrusion-based manufacturing.