Rugulopteryx okamurae: Effect of microwave pretreatment on PHB fermentation
Polyhydroxyalkanoates (PHA) are biodegradable and sustainable bioplastics that are a promising alternative to conventional petrochemical-based plastics and contribute significantly to the reduction of environmental pollution. This study investigates the potential of using the invasive macroalga Rugulopteryx okamurae as a feedstock for PHA production, specifically polyhydroxybutyrate (PHB), through fermentation with Cupriavidus necator . The macroalga was pretreated using microwave-assisted extraction at different temperature conditions, followed by enzymatic hydrolysis to enhance the release of fermentable sugars and subsequent PHB production. Results indicate that microwave pretreatment at 160 °C yielded the highest growth of C. necator (CDW = 1.75 g·L −1 ). However, pretreatment at higher temperatures (180 °C and 220 °C) led to reduced yields, probably due to the release of biological inhibitors. Additionally, the hydrolysate medium´s carbon-to-nitrogen (C/N) ratio was analysed, revealing that a lower C/N ratio, which was obtained in the hydrolysates from pretreated macroalgae, favoured bacterial growth. Higher C/N ratios obtained in the hydrolysate from non-pre-treated macroalgae were more conducive to PHB production, achieving the highest PHB accumulation (94 %). The study demonstrated that non-pretreated R. okamurae biomass led to the highest PHB accumulation, surpassing yields from other pretreatment methods like solid-state fermentation or hydrothermal acid pretreatment. This research highlights the potential of using R. okamurae , an underutilized and invasive macroalga, as a renewable resource for PHA production, offering a sustainable alternative to conventional plastics and addressing environmental challenges such as beach-cast biomass accumulation. Future studies could focus on optimizing pretreatment processes and exploring more efficient ways to convert macroalgae biomass into bioplastics. • Microwave pretreatment of R. okamurae at 160 °C increased growth of C. necator bacteria (CDW = 1.8 g·L −1 ). • The highest RS consumption (33.4 %) occurred with the 160 °C hydrolysate. • PHB production was highest in non-pretreated algae(1.31 g·L). • Non-pretreated algae achieved the highest PHB accumulation (94 %). • The C/N ratio 10.5:1 (non-pretreated algae) was the most favourable those studied for PHB production.
Authors
- Ana Blandino (ORCID: https://orcid.org/0000-0003-3727-8260)
- Carlos José Álvarez-Gallego (ORCID: https://orcid.org/0000-0002-1222-2482)
- Pedro Fernández-Medina (ORCID: https://orcid.org/0000-0003-4756-0219)
- Agustín Romero‐Vargas (ORCID: https://orcid.org/0000-0003-1922-8155)
- Manuel J. Díaz (ORCID: https://orcid.org/0000-0003-3657-5837)
Institutions
- Universidad de Cádiz (ES)
Publication Details
- Journal
- Industrial Crops and Products
- Published
- 2025-06-19
- DOI
- https://doi.org/10.1016/j.indcrop.2025.121373
- Citations
- 1
- Primary Topic
- biodegradable polymer synthesis and properties
- Type
- article
- Field-Weighted Citation Impact
- 0.60