Fluid Dynamics Exploration in Molten Salt Reactors: A Comprehensive Study of Draining Tank Using the Moving Particle Semi-Implicit Method

Molten Salt Reactors (MSRs) represent a promising advancement in nuclear energy technology through the use of liquid fuels, offering inherent safety features and efficient thermal conversion. A critical safety mechanism in MSRs is the drain tank system, designed to passively remove molten salt fuel during emergency shutdowns. This study presents a comprehensive hydrodynamic analysis of the draining process in such tanks using the Moving Particle Semi-Implicit (MPS) method, a mesh-free Lagrangian computational fluid dynamics technique well-suited for simulating free-surface flows. The investigation focused on key parameters including discharge velocity, pressure distribution, discharge rate, discharge coefficient, and Reynolds number for three fluids: light water, FLiBe (LiF-BeF₂), and FLiNaK (LiF-NaF-KF). Simulations were performed under isothermal conditions, neglecting heat transfer to isolate pure fluid dynamic behavior. Results reveal a consistent discharge pattern across all fluids, characterized by an initial rapid flow phase followed by gradual stabilization. FLiBe and FLiNaK, due to their higher densities and viscosities, exhibited slightly greater initial velocities and pressures than light water, yet all fluids demonstrated similar discharge rates and coefficients over time. The Reynolds number analysis confirmed turbulent flow regimes throughout the drainage process for each fluid. Despite differences in physical properties, the overall draining behavior and temporal trends in velocity and pressure were remarkably similar. These findings validate the use of MPS in analyzing transient liquid dynamics in MSR safety systems and provide valuable insights into reactor design optimization. Future work incorporating thermal effects could further enhance understanding of coupled thermofluid behavior, supporting the development of MSRs as a reliable and sustainable energy solution.Keywords: drainage, FLiBe, FLiNaK, liquid, MPS, MSR

Authors

Institutions

Publication Details

Journal
Computational And Experimental Research In Materials And Renewable Energy
Published
2025-05-31
DOI
https://doi.org/10.19184/cerimre.v8i1.53687
Primary Topic
Fluid Dynamics Simulations and Interactions
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Fluid Dynamics Exploration in Molten Salt Reactors: A Comprehensive Study of Draining Tank Using the Moving Particle Semi-Implicit Method

Muhammad Rizqie Arbie, Yacobus Yulianto, Asril Pramutadi Andi Mustari
Computational And Experimental Research In Materials And Renewable Energy
Fluid Dynamics Simulations and Interactions
article

Fluid Dynamics Exploration in Molten Salt Reactors: A Comprehensive Study of Draining Tank Using the Moving Particle Semi-Implicit Method

Muhammad Rizqie Arbie, Yacobus Yulianto, Asril Pramutadi Andi Mustari
article en

Abstract

Molten Salt Reactors (MSRs) represent a promising advancement in nuclear energy technology through the use of liquid fuels, offering inherent safety features and efficient thermal conversion. A critical safety mechanism in MSRs is the drain tank system, designed to passively remove molten salt fuel during emergency shutdowns. This study presents a comprehensive hydrodynamic analysis of the draining process in such tanks using the Moving Particle Semi-Implicit (MPS) method, a mesh-free Lagrangian computational fluid dynamics technique well-suited for simulating free-surface flows. The investigation focused on key parameters including discharge velocity, pressure distribution, discharge rate, discharge coefficient, and Reynolds number for three fluids: light water, FLiBe (LiF-BeF₂), and FLiNaK (LiF-NaF-KF). Simulations were performed under isothermal conditions, neglecting heat transfer to isolate pure fluid dynamic behavior. Results reveal a consistent discharge pattern across all fluids, characterized by an initial rapid flow phase followed by gradual stabilization. FLiBe and FLiNaK, due to their higher densities and viscosities, exhibited slightly greater initial velocities and pressures than light water, yet all fluids demonstrated similar discharge rates and coefficients over time. The Reynolds number analysis confirmed turbulent flow regimes throughout the drainage process for each fluid. Despite differences in physical properties, the overall draining behavior and temporal trends in velocity and pressure were remarkably similar. These findings validate the use of MPS in analyzing transient liquid dynamics in MSR safety systems and provide valuable insights into reactor design optimization. Future work incorporating thermal effects could further enhance understanding of coupled thermofluid behavior, supporting the development of MSRs as a reliable and sustainable energy solution.Keywords: drainage, FLiBe, FLiNaK, liquid, MPS, MSR

Computational And Experimental Research In Materials And Renewable EnergyVol. 8(1)
Bandung Institute of Technology (ID), Universitas Halu Oleo (ID)
Openalex Percentile: Top 85%
Fluid Dynamics Simulations and Interactions
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.