Toward Patterned Membranes for Biofouling Mitigation by Electrospinning

Biofilm buildup on water filtration membranes impedes flow, increases energy consumption, and diminishes filtration efficacy resulting in public health concerns. Recently, antifouling technology development has steered away from chemical means that limit use or create toxicity concerns. One such nonchemical method for reducing biofilm includes using biomimicry to pattern filter designs that reduce biofilm through physical means found in nature. Biomimetic designs can foster properties such as enhanced surface wetting that improves fouling resistance without eliciting a damaging environmental impact. In this study, electrospinning was used to deposit polymeric antifouling patterns on mixed cellulose ester membranes for improved filter performance. Aligned polycaprolactone fibers deposited onto the membranes that contained a 300–500 nm diameter and 1–10 μm square grid spacings provided sufficient bacterial disturbance that resulted in a >30% reduction in biofilm biovolume in both static and dead-end filtration processes. Furthermore, these fibers exhibited resistance to wettability with a contact angle of 102°. Despite added fibers that reduced flow through the membrane, filtration performance remained comparable to the controls. Herein, this work provides valuable insight into how electrospinning can be used to provide environmentally benign nanopatterns that improve filtration performance.