Tensile fracture initiation and propagation of granite and gneiss at wedge splitting tests: Part 1—Effect of notch type on tensile crack initiation and fracture mechanics results

Abstract Wedge splitting tests were conducted on a granite and a gneiss with similar mineralogy but different microstructure. The basic properties of the two rock types were characterized by petrographic analyses and mechanical tests. The granite specimens were split in one material direction, perpendicular to the rift plane, and the gneiss specimens were split in three different material directions, parallel and perpendicular to the foliation (and along and across a lineation). The effect of having a large blunt versus a sharp notch on the crack initiation was studied in the granite. The wedge splitting tests are unconventional for testing rocks and allowed to study the crack initiation and propagation under mode I loading condition in the quasi-brittle granite and brittle gneiss. The fracture energy and strain energy release rate were calculated. The strain energy release rate for gneiss, when splitting along and across the foliation, was around 45% and 60% of the values for the structurally isotropic granite. The fracture toughness was calculated from the strain energy release rate and was larger than corresponding values obtained from linear elastic fracture mechanics (LEFM). There was an effect on the early cracking stages by using a sharp notch compared with using a large blunt notch on the granite specimens, but the required largest force to split the specimens remained the same for the two notch types. The crack initiation started at a splitting force corresponding to 78% and 90% of the maximum splitting force on the specimens with a sharp notch and a large blunt notch, respectively. The results with a full force-displacement response during the crack propagation obtained for the brittle gneiss are unique. Most fracture mechanics results on rock materials are obtained from standard tests and LEFM and not via the measured strain energy release rate.