Dynamic Energy Absorption Performance of Titanium Slag Reinforced Concrete: An Experimental and Numerical Simulation-Based Study

With growing demands for improved blast resistance in concrete protective structures, developing new concrete materials that combine high toughness, impact resistance, and efficient energy dissipation is essential. This study replaces conventional aggregates with titanium slag and prepares three specimen groups: pure cement mortar (control), cement mortar with large titanium slag particles, and an optimized mix with titanium slag aggregates. Using Split Hopkinson Pressure Bar (SHPB) tests and AUTODYN finite difference simulations, stress-wave absorption and attenuation performance were systematically investigated. Results show that, under identical impact loading rates, the large-particle titanium slag group increased energy absorption by 23.5% compared with the control, while the optimized mix improved by 19.2%. Both groups maintained stable absorption efficiencies across different loading rates. Numerical simulations reveal that the porous titanium slag model attenuated stress waves by approximately 67.9% after passing through three slag layers, significantly higher than the 51.4% attenuation in the non-porous model. This improvement is attributed to multiple wave reflections and interferences caused by a two-order-magnitude difference in the elastic modulus between the slag and air interfaces, creating ring-shaped stress concentrations that disrupt wave propagation and dissipate impact energy. This research provides experimental support and mechanistic insights for titanium slag application in novel blast-resistant concrete.