Preparation and evaluation of altered zeolite and diatomite as affordable adsorbents in contaminated water treatment

Abstract Natural diatomite as well as zeolite has been recognized as useful affordable adsorbents for water treatments for heavy metals elimination. The raw materials, zeolite and diatomite were modified using organic acid (citric acid) in different molarity degrees, i.e., 0.2, 0.4, 0.6, 0.8 and 1.0 molar, aiming to increase their surface area by forming new functional groups and increasing the active sites. The modifiers were tested as adsorbent materials for eliminating heavy metals (Fe, Zn, Cr, Pb, Cu, Al, Ni, As and Cd) from El-Batts drain wastewater, Fayoum, Egypt. Also, diatomite as well as zeolite were investigated regarding surface chemistry (SEM), (FTIR), and antimicrobial activities. Batch adsorption trials were performed, and four kinetic models employed in assessing heavy metals release's data compliance from studied contaminated water including Elovich, Parabolic diffusion, modified Freundlich, and first-order equations. Results revealed that metals adsorption on zeolite and diatomite conforms well to Elovich model. The kinetic studies were better fitted to the Elovich and modified Freundlich models. With a correlation coefficient ( R 2 > 0.98), heavy metals elimination by the various treatments was significantly correlated with the Elovich, first-order and modified Freundlich models. Results showed the treated zeolite and diatomite materials were verified to be functional adsorbents for minimizing the hazards of heavy metals from low-quality water to the permissible levels. In addition, washing, heating, and treating zeolite and diatomite with moderate organic acid (citric acid) could increase the active sites and boost their surfaces with open pores and channels. The treatment of zeolite and diatomite with citric acid at 0.6 and 0.2 M, respectively, exhibited optimal molarity values to increase their adsorption capacity to the studied inorganic pollutants with their various concentrations.

Authors

Institutions

Publication Details

Journal
Applied Water Science
Published
2025-06-11
DOI
https://doi.org/10.1007/s13201-025-02518-x
Citations
5
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
4.09
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Preparation and evaluation of altered zeolite and diatomite as affordable adsorbents in contaminated water treatment

Hossam F. Nassar, Alaa Zaghloul, H. Kabary, H. Mansour et al.
5 citations
Applied Water Science
Adsorption and biosorption for pollutant removal
4.09
article

Preparation and evaluation of altered zeolite and diatomite as affordable adsorbents in contaminated water treatment

Hossam F. Nassar, Alaa Zaghloul, H. Kabary, H. Mansour, Sayed A. Ahmed
article en
5 citations

Abstract

Abstract Natural diatomite as well as zeolite has been recognized as useful affordable adsorbents for water treatments for heavy metals elimination. The raw materials, zeolite and diatomite were modified using organic acid (citric acid) in different molarity degrees, i.e., 0.2, 0.4, 0.6, 0.8 and 1.0 molar, aiming to increase their surface area by forming new functional groups and increasing the active sites. The modifiers were tested as adsorbent materials for eliminating heavy metals (Fe, Zn, Cr, Pb, Cu, Al, Ni, As and Cd) from El-Batts drain wastewater, Fayoum, Egypt. Also, diatomite as well as zeolite were investigated regarding surface chemistry (SEM), (FTIR), and antimicrobial activities. Batch adsorption trials were performed, and four kinetic models employed in assessing heavy metals release's data compliance from studied contaminated water including Elovich, Parabolic diffusion, modified Freundlich, and first-order equations. Results revealed that metals adsorption on zeolite and diatomite conforms well to Elovich model. The kinetic studies were better fitted to the Elovich and modified Freundlich models. With a correlation coefficient ( R 2 > 0.98), heavy metals elimination by the various treatments was significantly correlated with the Elovich, first-order and modified Freundlich models. Results showed the treated zeolite and diatomite materials were verified to be functional adsorbents for minimizing the hazards of heavy metals from low-quality water to the permissible levels. In addition, washing, heating, and treating zeolite and diatomite with moderate organic acid (citric acid) could increase the active sites and boost their surfaces with open pores and channels. The treatment of zeolite and diatomite with citric acid at 0.6 and 0.2 M, respectively, exhibited optimal molarity values to increase their adsorption capacity to the studied inorganic pollutants with their various concentrations.

Applied Water ScienceVol. 15(7)
Beni-Suef University (EG), Nahda University (EG), National Research Centre (EG)
Openalex Percentile: Top 7%
Adsorption and biosorption for pollutant removal
4.09
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.