Analysis of Poly-3-Hydroxybutyrate Production with Different Microorganisms Using the Dynamic Simulations for Evaluation of Economic Potential Approach

Concerns with sustainability have led to increasing interest in bioprocesses in the last decades. In particular, environmental problems with plastic disposal have been a major issue. Bioplastics such as poly-3-hydroxybutyrate (PHB) are potential substitutes since they are biodegradable and less toxic. However, their production costs are high and optimization is required. Many works have therefore aimed to build strains capable of higher product yields. But in the case of products that share a precursor with biomass and in the case of intracellular metabolites, a trade-off may occur. Not only yield but also final biomass, titer, and productivity have to be considered. Therefore, this work presents an approach named Dynamic Simulations for Evaluation of Economic Potential (DySEEP), which uses dynamic flux balance analysis (DFBA) and an economic metric as a function of the bioprocess parameters for evaluation of the production of bioproducts of industrial interest. As a case study, the PHB production potential of recombinant <i>Cupriavidus necator</i>, <i>Escherichia coli</i>, and <i>Saccharomyces cerevisiae</i> was analyzed. While some key polymer properties cannot be predicted due to the nature of DFBA simulations, the PHB production is a good case study to highlight the trade-off between biomass and product formation. It was identified that for growth-associated production with recombinant <i>E. coli</i> and the NADPH-dependent PHB synthesis pathway, the scenario that starts positive cash flows is when a yield of 0.37 g/g and its respective final biomass, titer, and productivity is achieved, and the maximum theoretical profit would be achieved when a yield of 0.50 g/g and its respective parameters is reached. Furthermore, comparison between the internal flux distribution of the best scenario identified and the flux distributions of a simulation constrained with experimental data from the literature allowed the suggestion of genetic modifications that could enhance PHB production, such as knockouts for interruption of the oxidative phase of the pentose phosphate pathway, of the acetate production reaction, and of the reaction catalyzed by the 2-oxoglutarate dehydrogenase enzyme or downregulation of the TCA cycle, setting therefore potential targets for metabolic engineering strategies. For nongrowth-associated production with both recombinant <i>E. coli</i> and <i>C. necator</i>, the scenario at which cash flow starts to become positive is when 40% (mol) of the available glucose is used in the growth phase and the remaining 60% is used in the production phase, and the scenario that leads to the maximum theoretical profit, within a realistic maximum PHB content, is when 20% (mol) is used in the growth phase and the remaining 80% in the production phase, information that sets targets for bioreactor operation strategies such as defining the moments for nutrient limitation and for synthetic biology by showing when to activate genetic toggle-switches.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2025-06-11
DOI
https://doi.org/10.1021/acsomega.4c11178
Primary Topic
Microbial Metabolic Engineering and Bioproduction
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Analysis of Poly-3-Hydroxybutyrate Production with Different Microorganisms Using the Dynamic Simulations for Evaluation of Economic Potential Approach

G. Roux, Rafael David de Oliveira, José Gregório Cabrera Gomez, W. A. Santos
ACS Omega
Microbial Metabolic Engineering and Bioproduction
article

Analysis of Poly-3-Hydroxybutyrate Production with Different Microorganisms Using the Dynamic Simulations for Evaluation of Economic Potential Approach

G. Roux, Rafael David de Oliveira, José Gregório Cabrera Gomez, W. A. Santos
article en

Abstract

Concerns with sustainability have led to increasing interest in bioprocesses in the last decades. In particular, environmental problems with plastic disposal have been a major issue. Bioplastics such as poly-3-hydroxybutyrate (PHB) are potential substitutes since they are biodegradable and less toxic. However, their production costs are high and optimization is required. Many works have therefore aimed to build strains capable of higher product yields. But in the case of products that share a precursor with biomass and in the case of intracellular metabolites, a trade-off may occur. Not only yield but also final biomass, titer, and productivity have to be considered. Therefore, this work presents an approach named Dynamic Simulations for Evaluation of Economic Potential (DySEEP), which uses dynamic flux balance analysis (DFBA) and an economic metric as a function of the bioprocess parameters for evaluation of the production of bioproducts of industrial interest. As a case study, the PHB production potential of recombinant <i>Cupriavidus necator</i>, <i>Escherichia coli</i>, and <i>Saccharomyces cerevisiae</i> was analyzed. While some key polymer properties cannot be predicted due to the nature of DFBA simulations, the PHB production is a good case study to highlight the trade-off between biomass and product formation. It was identified that for growth-associated production with recombinant <i>E. coli</i> and the NADPH-dependent PHB synthesis pathway, the scenario that starts positive cash flows is when a yield of 0.37 g/g and its respective final biomass, titer, and productivity is achieved, and the maximum theoretical profit would be achieved when a yield of 0.50 g/g and its respective parameters is reached. Furthermore, comparison between the internal flux distribution of the best scenario identified and the flux distributions of a simulation constrained with experimental data from the literature allowed the suggestion of genetic modifications that could enhance PHB production, such as knockouts for interruption of the oxidative phase of the pentose phosphate pathway, of the acetate production reaction, and of the reaction catalyzed by the 2-oxoglutarate dehydrogenase enzyme or downregulation of the TCA cycle, setting therefore potential targets for metabolic engineering strategies. For nongrowth-associated production with both recombinant <i>E. coli</i> and <i>C. necator</i>, the scenario at which cash flow starts to become positive is when 40% (mol) of the available glucose is used in the growth phase and the remaining 60% is used in the production phase, and the scenario that leads to the maximum theoretical profit, within a realistic maximum PHB content, is when 20% (mol) is used in the growth phase and the remaining 80% in the production phase, information that sets targets for bioreactor operation strategies such as defining the moments for nutrient limitation and for synthetic biology by showing when to activate genetic toggle-switches.

ACS OmegaVol. 10(26)
Universidade de São Paulo (BR), Norwegian University of Science and Technology (NO)
Fundação de Amparo à Pesquisa do Estado de São Paulo, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Conselho Nacional de Desenvolvimento Científico e Tecnológico, Norges Forskningsråd
Openalex Percentile: Top 88%
Microbial Metabolic Engineering and Bioproduction
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.