The post-deformation softening and hardening mechanisms of a Mg-2Y-1Zn alloy during double-stage hot compression

• The evolutions of FS showed a non-linear dependence on deformation conditions and was closely related to Z parameter. • The static recovery coupled with cross-overlapping between kink bands and twins were observed under deformation conditions of 300 °C/0.001 s -1 . • Meta-dynamic recrystallization led to both static softening and hardening phenomenon at 400 °C/0.1 s -1 . • The LPSO phases inhibited the growth of DRX grains and affected static recrystallization during holding stage. • Static softening kinetics model was established based on Johnson-Mehl-Avrami-Kolmogorov equation. Multi-pass hot processing methods are commonly used in magnesium (Mg) alloys to overcome the poor workability due to limited slip systems, which generally involve complicated post-deformation softening and hardening behaviors. In this work, to reveal post-deformation softening and hardening mechanisms of a Mg-2Y-1 Zn alloy, double-stage hot compression tests and microstructural observations were conducted. The results showed that the softening fraction of Mg-2Y-1 Zn alloy showed a non-linear dependence on deformation conditions and could be general coupled by Z parameter. Due to the formation and cross-overlapping of twins and kinks, only static recovery (SRV) occurred during holding process at 300 °C/0.001 s -1 which led to the least static softening: 5.52 % after 10 s of holding. For samples at 400 °C/0.001s -1 , the enhanced post-deformation softening, which is 11.93 % after 10 s of holding, was attributed to static recrystallization (SRX) followed continuous dynamic recrystallization (CDRX) happened during first deformation stage as well as SRV influenced by the LPSO phases. Under deformation condition of 400 °C/0.1 s -1 , the coupled meta-dynamic recrystallization (MDRX) and SRX resulted in serious stress relaxation, which is 42.83 % after 10 s of holding, and caused hardening phenomenon at reloading stage. The 18R-LPSO and 14H-LPSO phases synchronously worked on deformation behaviors and limited the growth of recrystallized grains. Further, a simplified static softening kinetics model was established based on Johnson-Mehl-Avrami-Kolmogorov equation and employed to rationalize experimental data.

Authors

Institutions

Publication Details

Journal
Journal of Magnesium and Alloys
Published
2025-06-06
DOI
https://doi.org/10.1016/j.jma.2025.05.005
Citations
1
Primary Topic
Magnesium Alloys: Properties and Applications
Type
article
Field-Weighted Citation Impact
0.60
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

The post-deformation softening and hardening mechanisms of a Mg-2Y-1Zn alloy during double-stage hot compression

Fulin Jiang, Jie Teng, Hui Zhang, Hang Xu et al.
1 citations
Journal of Magnesium and Alloys
Magnesium Alloys: Properties and Applications
0.60
article

The post-deformation softening and hardening mechanisms of a Mg-2Y-1Zn alloy during double-stage hot compression

Fulin Jiang, Jie Teng, Hui Zhang, Hang Xu, Luoyi Wu, Mo Yang, Jie Tang
article en
1 citations

Abstract

• The evolutions of FS showed a non-linear dependence on deformation conditions and was closely related to Z parameter. • The static recovery coupled with cross-overlapping between kink bands and twins were observed under deformation conditions of 300 °C/0.001 s -1 . • Meta-dynamic recrystallization led to both static softening and hardening phenomenon at 400 °C/0.1 s -1 . • The LPSO phases inhibited the growth of DRX grains and affected static recrystallization during holding stage. • Static softening kinetics model was established based on Johnson-Mehl-Avrami-Kolmogorov equation. Multi-pass hot processing methods are commonly used in magnesium (Mg) alloys to overcome the poor workability due to limited slip systems, which generally involve complicated post-deformation softening and hardening behaviors. In this work, to reveal post-deformation softening and hardening mechanisms of a Mg-2Y-1 Zn alloy, double-stage hot compression tests and microstructural observations were conducted. The results showed that the softening fraction of Mg-2Y-1 Zn alloy showed a non-linear dependence on deformation conditions and could be general coupled by Z parameter. Due to the formation and cross-overlapping of twins and kinks, only static recovery (SRV) occurred during holding process at 300 °C/0.001 s -1 which led to the least static softening: 5.52 % after 10 s of holding. For samples at 400 °C/0.001s -1 , the enhanced post-deformation softening, which is 11.93 % after 10 s of holding, was attributed to static recrystallization (SRX) followed continuous dynamic recrystallization (CDRX) happened during first deformation stage as well as SRV influenced by the LPSO phases. Under deformation condition of 400 °C/0.1 s -1 , the coupled meta-dynamic recrystallization (MDRX) and SRX resulted in serious stress relaxation, which is 42.83 % after 10 s of holding, and caused hardening phenomenon at reloading stage. The 18R-LPSO and 14H-LPSO phases synchronously worked on deformation behaviors and limited the growth of recrystallized grains. Further, a simplified static softening kinetics model was established based on Johnson-Mehl-Avrami-Kolmogorov equation and employed to rationalize experimental data.

Journal of Magnesium and AlloysVol. 13(9)
Hunan University (CN), Kyoto University (JP), Yueyang Changling Equipment Research Institute (China) (CN)
Climate action
Openalex Percentile: Top 33%
Magnesium Alloys: Properties and Applications
0.60
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.