Bilayered metallic cathodes consisting of pure Mg and Zn:Al thin films optimized by Laser-induced Thermionic Vacuum Arc (LTVA) technology

Bilayer metallic electrodes of magnesium and zinc-aluminum alloys Mg/Zn:Al were prepared using combined laser-thermionic vacuum arc methods. Plasma diagnosis suggests laser-plasma interaction by increasing the discharge voltage when the laser is on, which is converted by thermal annealing of plasma ions. A magnesium thin film with a lower work function, covered with a Zn:Al (4:1) layer was successfully used for efficient charge injection into electroluminescent diodes. The zinc-aluminum combination preserved the electrical conductivity of the thin magnesium film and protected it against oxidation. The capacitance-voltage measurements confirmed the integrity of the magnesium layer, whereas the work function was not affected. The zinc-aluminum alloy obtained through a thermionic vacuum arc exhibits good conductivity compared to pure zinc layers and better stability against degradation.