Design and Analysis of Natural Fiber-Reinforced Jute Woven Composite RVEs Using Numerical and Statistical Methods

Woven composites and natural fiber-reinforced composites both have widespread applications in various industries due to their appealing load-carrying capacity and performance compared to conventionally manufactured composites, such as polymeric composites. Representative volume element (RVE) generation is one of the most effective and widely adopted methods for estimating mechanical performance in current research. This study aims to explore the effects of three significant factors in woven composite RVEs: yarn spacing (from 0.5 mm to 1.5 mm), fabric thickness (from 0.2 to 0.5 mm), and shear angle (from 3.5 to 15 degrees) through finite element methods and statistical analysis to understand their effectiveness in the elastic moduli’s. The validation of this research has been conducted using available literature. The generation of representative volume elements (RVEs) and the calculation of elastic moduli were performed using ANSYS-19, including the material designer feature. The experimental design was carried out using Design-Expert software version 13, which used response surface methodology. The materials selected for this study were jute fiber and epoxy. After obtaining the elastic moduli from the ANSYS material designer, three responses were considered: longitudinal Young’s modulus (E11), in-plane shear modulus (G12), and major Poisson’s ratio (V12). ANOVA (Analysis of Variance) and 3D contour graphs were generated to further analyze and correlate the effects of the selected materials on these responses. These investigations revealed that in comparison to twill structure, plain structure in natural fiber-reinforced woven composites could be a good alternative. Additionally, the findings highlighted that yarn spacing and fabric thickness significantly influence the considered moduli in plain-weave NFRC material RVEs. However, in twill-woven composite RVEs, the effects of yarn spacing, fabric thickness, and shear angle were found to be considerable. Moreover, statistical analysis has found the best combinations for both plain and twill structures, while the yarn spacing was 1 mm, the shear angle was 9.25 degrees, and the fabric thickness was 0.35 mm.